- (1)
- Assembly Presses (1)
- Balling Presses (3)
- Bending And Straightening Presses (6)
- Bending Presses (152)
- Blanking Presses (2)
- Bolt Presses (1)
- CNC Bending Presses (7)
- Coining Presses (1)
- Crank Presses (11)
- Deburring Presses (5)
- Die Forging Hammer (4)
- Die Spotting Presses (18)
- Double Column Eccentric Presses (8)
- Double Column Presses (8)
- Double Column Pulling Presses (4)
- Eccentric Presses (103)
- Edge-Merging Presses (9)
- Fine Presses (15)
- Fly Presses (18)
- Fly Presses With Electro Mechanical Drive (5)
- Four Point Crank Presses (1)
- Friction Spindle Presses (3)
- H-Frame Drawing Presses (1)
- H-Frame Eccentric Presses (3)
- H-Frame Punching And Forming Machines (1)
- High Speed Presses (17)
- Horizontal Forging Machines (4)
- Horizontal Presses (8)
- Hydraulic Column Presses (3)
- Hydraulic Die-Spotting And Try-Out Presses (10)
- Hydraulic Double Column Presses (12)
- Hydraulic Fine Blanking Presses (6)
- Hydraulic Forging Presses (2)
- Hydraulic H-Frame Presses (7)
- Hydraulic Open Gap Bench Presses (3)
- Hydraulic Open Gap Drawing Presses (4)
- Hydraulic Open Gap Presses (24)
- Hydraulic Presses (96)
- Knuckle Joint Presses ( 1 - 3 Columns) (4)
- Low-Pulling Presses (2)
- Mandrel Presses (1)
- Manual Spindle Presses (10)
- Manually Operated Presses (4)
- Mechanical Presses (20)
- Multi-Stage Presses For Solid Forming (1)
- Oil Hydraulic Presses (1)
- Open Gap Eccentric Presses (106)
- Open Gap Toggle Lever Presses (10)
- Other Crank Presses (2)
- Other Eccentric Presses (1)
- Other Hydraulic Presses (5)
- Other Mechanical Presses (4)
- Pneumatic Bench-Type Presses (4)
- Pneumatic Presses (14)
- Press Brakes (4)
- Presses For Special Applica (1)
- Pressure Joining Units (1)
- Punching Machines (21)
- Punching Presses (19)
- Ring Rolling Mills (1)
- Single Column Presses (10)
- Straight-Bending Presses (20)
- Toggle Lever Presses (9)
- Transfer Presses (2 - 4 Columns) (14)
- Wire Nail Presses (1)
- Workshop Presses (59)
- more
- A+B FASTECH (3)
- A. U. SÖHNE (1)
- A.COLLY W.UNSELD (1)
- AB (1)
- ABM (1)
- ACME (2)
- ADIRA (1)
- AGEO (6)
- AIDA (2)
- AMADA (18)
- AMBOLD (12)
- AMBROGIO GALLI (1)
- AP+T Lagan (2)
- Arisa (2)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (5)
- AYEL-TECH (15)
- AYUTOR (1)
- BAIER (1)
- BAKKER (1)
- BALCONI (1)
- Barnaul (2)
- BAYKAL (2)
- BBT (1)
- BBT PRESSEN (1)
- BELTECH (1)
- BELTECH GMBH (1)
- BEMA (1)
- Berg + Schmid (10)
- Bernardo (8)
- BERNINGHAUS (1)
- Berrenberg (4)
- BETEMA BERLIN (1)
- BETZ (1)
- BEUTLER (5)
- BEYELER (5)
- BLECKEN (1)
- BLEMA ZEULENRODA (1)
- BMW (1)
- BOLDRINI (1)
- Borries (2)
- Bosch (2)
- BOSCHERT (1)
- BRAUN (1)
- BRET (1)
- BRUDERER (11)
- BRUNNHUBER (1)
- BRÃœCK (1)
- BUCHER-GUYER (1)
- BURGER (1)
- Bussmann (3)
- BYSTRONIC (6)
- BöLLHOFF (1)
- Calende (11)
- CALLAHAN (1)
- CAME PANASONIC (1)
- Caronno (3)
- CHIN FONG (3)
- CHU LING MACHINE (1)
- CLEARING (1)
- CLUANA (2)
- CoastOne (4)
- COLLY (5)
- COLOMBO AGOSTINO (1)
- COMESSA (1)
- CRIMPONE (1)
- DAKO (1)
- DARLEY (5)
- DE GRAAF (1)
- DENER (1)
- DERATECH (1)
- DEUTSCHE VEREINIGTE (1)
- DIEBELS (1)
- Dieffenbacher (3)
- DIOSGYöRER (1)
- dirinler (3)
- DONEWELL (1)
- DORST (13)
- DUNKES (21)
- DURMA (6)
- DURMAZLAR (1)
- EBU (24)
- ECAI (1)
- Eckold (25)
- EDEL (1)
- EDELHOFF (7)
- EHT (21)
- EIGEN (1)
- EIGENBAU (1)
- EISENWERK HENSEL (1)
- EITEL (9)
- EKALE (1)
- ELBARON (1)
- ELUMATEC (6)
- EM HART, TUCKER (1)
- EMANUEL (1)
- ... more
Manufacturer:
(Category: 106)
New in: 1965
used
pressure:160 tdistance between columns:2050/1900 mmstroke:15 - 170 mmno. of strokes:15 - 40 /mindistance table/ram, max. stroke up, adjustment up:690 mmtable surface area:1600 x 800 mmside window:800 mmram surface:1620 x 700 mmram adjustment:140 mmpower requirement:15,0 kWweight:24,0 tDimensions (WxDxH):3,3 x 2,3 x 5,3 mheight over floor:4,8 mheight beneath floor:0,5 mclutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic
New in: 1965
used
1.500 € Description: Machine number: 12965 Printing capacity: 250000 kg Feed size: 300 x 5 mm Belt infeed height (with plate): 125 - 315 mm Additional device: 2-hand operation Projection: 450 mm Installation height center dimension (without plate): 350 mm Clamping plate thickness: 110 mm Trunnion Ø: 65 mm Plunger strokes: 35 min. Adjustable ram: 80 mm Stroke adjustable: 20 - 140 mm Motor power: 20 HP Voltage: 380 V Lower table top dimensions: approx. 1200 x 850 mm Upper table top dimensions: approx. 750 x 330 mm With electronic roller feed: Dreher WAV-RDS-2E 1160B, serial no. 940059, year of manufacture 1994, feed 300 x 3 mm With reel straightening machine combination: BBT ABH 1100 / BRM 300, year of manufacture 2019, feed 300 x 3 mm With minimum quantity lubrication: Schmidtweight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,210 x 3,000 mm
New in: 1965
used
Machine type: Eccentric press Manufacturer: GRÖTZINGER Model: 15 t Built: 1965 Condition: good Offer type: used machine Technical data: Pressure force: 15.0 t Extension: 120 mm Table: 460 x 255 mm Installation height: 250 mm Drive: 1.6 kW Remark: infinitely variable speed adjustment Weight: 750 kg The machine is in a good and ready-to-use condition and can be visited and demonstrated by us. We would be happy if our offer finds your interest.
New in: 1965
used
Article number: 13-20-001 Manufacturer: Schuler Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1965 L x W x H: approx. 1200x1800x2400 Weight: approx. 2500kg Compressive force: approx. 25000kg Stroke of ram: approx. 8-59mm Max. installation height: approx. 550-1150mm Power requirement: approx. 1.5 hp Other accessories on request Price and other technical data on request
New in: 1965
used
pressure:20 tStroke:230 mmtable surface area:Ø600 mmdistance table - lower edge of ram:770 mmweight:595 kg ... more information
New in: 1965
used
Printing capacity max. 25 t, table 600 x 600 mm, stroke max. 350 mm ... more information
New in: 1965
used
New in: 1965
used
Power of parallel/offset crankshaft: 30t/2x20t, stroke: 50mm, clamping surface: 230mm/460mm, face of tappets: 2x 30mm/110mm, average of clamping journals: 38mm. Max./min. Opening front dead center: 240mm/180mm, ejection distance: 24mm. Max./min. Band width: 80(100)mm/10(5)mm, max. feed: 120mm. Running speed: 60-180rpm, drive pulley diameter: 180mm, gear reduction: 1:4, documentation available.
New in: 1965
used
Pressing force: 12.5t, stroke: 8-60mm, stroke speed: 140/min, connected load: 1kW, weight: 1.1t. ... more information
New in: 1966
used
throat: ca. 300 mmstroke: ca. 200 mmpressure capacity max.: 35 tdie cushion hydr. pressure/stroke: 15 ttotal power requirement: 5,6 kWweight of the machine ca.: ca 2,5 tdimensions of the machine ca.: 1 x 0,9 x H 2,4 m mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1966
used
Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t
New in: 1966
used
New in: 1966
used
Pressing force: 15t, stroke adjustment: 0-60mm, stroke speed: 120/min. ... more information
New in: 1966
used
pressure:035 tthroat:225 mmstroke:8 - 100 mmno. of strokes:110 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:580 x 460 mmhole in the table:250 x 150 mmtable height over floor:700 mmtable adjustable:230 mmram surface:355 x 120 mmram adjustment:70 mmpower requirement:2,2 kWweight:1,5 tdimensions (WxDxH):1,0 x 1,5 x 2,05 mclutch:rolling key overload protection in ram:mechanical
New in: 1966
used
pressure:063 tthroat:450 mmstroke:8 - 100 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:720 x 800 mmhole in the table:280/250 mmtable height over floor:800 mmpassage to the back:290 mmram surface:450 x 280 mmram adjustment:63 mmpower requirement:7,5 kWweight:4,7 tdimensions (WxDxH):1,3 x 2,0 x 2,65 mclutch:pneumatisch overload protection in ram:mechanisch
New in: 1966
used
pressure: 100 tthroat: 410 mmstroke: 8-112 mmno. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mmtable surface area: 950 x 700 mmram surface: 700x450 mmhole in the table: Ø 280 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 7,0 tdimensions of the machine ca.: 1400x2200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1966
used
Eccentric press Manufacturer KRS (Kurt Rompel Solingen) Type EPV50, YOC 66, Printing capacity 50 t, Plunger stroke 80 mm, Weight approx. 2.500kg UVV Test Book Machine fully operational ... more information
New in: 1966
used
pressure:200 tdistance between columns:1100 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1100 mmtable surface area:1000 x 1000 mmpressure of drawing cushion in table:63 tstroke of drawing cushion in table:250 mmdie cushion area:800 x 750 mmtable height over floor:800 mmram surface:1000 x 1000 mmSpeed down:400 mm/sspeed up:250 mm/sworking speed:22 - 56 mm/spower requirement:45,0 kWweight:24,0 tdimensions (WxDxH):2,4 x 1,5 x 5,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic
New in: 1966
used
600 € Description: Capacity: 10 tonnes Collection on: 29/04/2024 or 06/05/2024 , ,Collection times by arrangement , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in ,in the item description ,Approx. Onsite Dimension. (l x w x h): 600 x 1,000 x 2,300 mm, weight approx.: 1,000 kg
New in: 1966
used
100 € Description: Table surface area approx.: 2000x600 mm Approx. Onsite Dimension. (l x w x h): 2,200 x 1,000 x 1,500 mm, weight approx.: 3,500 kg, table surface area l x w : 2000x600 mm ... more information