saws used for sale

Description: 350 mm blade diameter Quick clamping vice, head rotation, inclined cuts 0 to 45 Collection on: 29/04/2024 or 30/04/2024 afternoon or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 500 x 1,200 x 1,330 mm

This KASTOWIN A4.6 sawing machine was manufactured in 2019. With a cutting range of 460 mm, its suitable for various material sizes, offering flexible operation. The machine has a hydraulic material clamping system and a saw motor with variable cutting speed ranging from 12 to 150 m/min. Its dimensions are 1650 mm in length, 2900 mm in width, and 2030 mm in height, with a weight of 3450 kg. Consider purchasing this KASTOWIN A4.6 for enhanced sawing capabilities. Contact us for further details regarding this sawing machine.

This PRESSTA EISELE Profilma 600 R was manufactured in 2013. It features a 9.2 kW drive with an 18.5 kW reinforced option and uses saw blades with a diameter of 600 mm. The cutting range allows for a maximum cutting height of up to 210 mm and a maximum cutting width of 350 mm. It includes a Siemens S7-300 control system and a chip extraction system with a 4 kW motor. Contact us for more information.

saw blade diameter: 315 mmcutting diameter: 95 mmcutting capacity - round: bei 90° / 95 mmcutting capacity - square: 95 x 95 mmcutting capacity - round: bei 45° / mmcutting capacity flat: 140 x 80 mmcutting capacity - square: 45° / mmsaw blade speeds: 33/60 p. min.Drive: 1,3/1,8 kWweight of the machine ca.: 300 kgdimensions of the machine ca.: 700 x 1000 x 2050 mmCondition: ready for operation: Electric 400 Volt: Cooling equipment: Roller conveyor with measuring stop: 3000 mmSemiautomatic: Function as follows: 1. clambing material. 2-hand start: material sawing, 3. material ease. 4. Sawing unit goes back in starting position. Cooling equipment in the base, pneumatic high-speed tensioning arrangement workpiece, durable transmission, vertical guidance in dove tail guidance, mitre cuts of 45° left to 60° right, spare saw blade. Machine ready to be demonstrated - very good condition. ...

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 135 mmsaw blade diameter: 370/400 mmfeed speeds: 0-500 mm/mincutting speed: 1400/2800 U/minrange of angles: 0-180 °capacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 280 x 70 mmcapacity 45 degrees: square: 105 mmWheel width: 185 mmtotal power requirement: 3,7/4,5 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1,3 x 1,1 x 1,7 mCondition: ready for operation: Electric 380 Volt: Compressed air steering for saw proceedings: Electric 380 Volt: Robust semi-automatic light metal profile sawing machine with cut from below and pneum. workpiece clamping from above, saw bridge adjustable from front toback. The year of construction is estimated! Discharge roller conveyor 3 m withelectronic measuring device, which is however not functional, therefore free of charge.Machine dealer with own stock of 2500  ...

Semi-automatic with miter Saw blade size 3830x27x0.9 mm Cutting speed 15-100 m/min. Cutting capacity at 90 degrees 305 mm / 360×305 mm Cutting capacity at 45 degrees 265 mm / 265×300 mm Cutting capacity at 30 degrees 175 mm / 175×300 mm ... more information

Description German-made metal band saw equipped with versatile sawing functions. Maximum cutting diameter 600mm. Equipped with a digital length measuring sensor and an angle degree display. The saw can be operated with a program or manually. If necessary, you can bring an outdoor roller track of about 10m and several spare blades belonging to the machine. Instructions for use in Finnish and original Kaltenbah instructions. The machine has electricity and can be used for a test run.

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Automatic positioning of the sawing unit via E 255 control system Cutting range at 90°: 195 x 120 mm Cutting range at 45°: 135 x 120 mm Minimum Quantity Spraying Device Pneumatic material clamps Mitre cuts possible on both sides 2-hand operation

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

cutting diameter: 345 mmdimensions of saw-band: 4780 x 32(34) x 1,1 mmcutting width: s. Abbildung mmcoolant pump: Typ 2C0P1-14H coolant capacity: 50 dm³output: 2,6 angle adjustable from - to: -45 bis +60 Gradweight of the machine ca.: 630 kgdimensions: ca. 2400 x 845 x 1430 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This KASTO sawing machine was manufactured in 2019. It features a robust 2200 kg weight, along with saw blade dimensions of 5,090 x 34 x 1.1 mm for precise cuts. The cutting range for round materials extends up to 330mm, with a maximum feed per stroke of 500mm and a cutting speed of 12 to 150 m/min. Cooling lubricant capacity is around 86l. Buy this KASTO WIN A3.3 sawing machine. Contact us for more information.

Description: Dual-tube cutting machine DCH70M with deburrer BEWO DB 70 No. 9811463 Specifications: - Workable diameter: 12 - 76 mm - Range of workable lengths: 35 - 4000 mm - Range of brushable lengths: 140 - 4000 mm , - Rated power of cutting unit: 5.5 kW - Range of cutting unit speed: 20 - 120 m/min Equipment: - Bar loader with beam magazine - Control panel containing Siemens 57 PLC - Packing table - Air-channelized tube cleaning system - User and maintenance manual - CE conformity Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 6000x2300mm - 2650 Kg Cutting unit: 6800 x 1300mm - 3200 Kgweight approx.: 7,100 kg, Approx. Onsite Dimension. (l x w x h): 18,400 x 2,300 x 1,800 mm

Description: Two-pipe cutting machine DCH76M with BEWO DB 90 deburring machine Suitable for cutting two pipes at the same time and deburring them. N° 0711598 Specification: , Machinable diameter: 8 - 76 mm Workable length range: 40 - 2000 mm Brushable length range: 140 - 2000 mm , Rated power of cut-off unit: 5.5 kW Cut-off unit speed range: 30 -180 m/min Machine equipped with: , Bar feeder with bundle magazine with 5 guides Control panel containing PLC SIEMENS 57 Packing change table Ducted air tube cleaning system Use and maintenance manual Harmonisation of CE standards Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 4600x2300mm - 2200 Kg Cutting unit: 4500x1300mm - 2800 Kgweight approx.: 6,200 kg, Approx. Onsite Dimension. (l x w x h): 5,600 x 2,300 x 1,800 mm

Description: speed 36/72 m/min blade size 2950x25.4x0.9 mm start/end of shift 60/10 barweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 900 x 1,500 x 1,700 mm ... more information

Description: Technical documentation and instruction manual not available.weight approx.: 165 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 600 x 1,400 mm ... more information

Description: Machine with CE certification. Complete refrigeration system. Automatic workpiece feed, programmable cutting cycles. Cutting capacity round sections: 320 mm Belt inclination up to 45°. Technical documentation and instruction manual available.weight approx.: 1,250 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 1,700 mm

: gebraucht : 1991 : 6252 : prompt, Zwischenverkauf v : Deutschland : 1450 €: 1 : 250 mm: 4500 U/Min: ca. 70 mm Höhe : ca. 48 mm Höhe : 2.2 kW: 950 mm: 950 mm: 950 mm: 156 kgSaw blade tiltable 90 - 45°Longitudinally movableAngle gauge +/- 45°Without operating manualDoes not comply with the german UVV and austrian AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold circular saw, metal circular saw, mitre saw, circular saw, sawing system-Manufacturer: Kaltenbach, cold circular saw metal circular saw type RKT 631 HG with roller conveyor left / right-Stop length: 1000 mm-Max. saw blade diameter: 710 mm-Drive power: 3.0 / 5.0 kW-Rotating base adjustment: continuously left/right-Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm-Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm-Cutting speed: blade diameter 710 mm 11 / 22 m/min.-Saw blade feed speed: continuously variable 0 - 1000 mm/min-Accessories: incl. 2nd saw blade-Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg-Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg-Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg-Total weight: 3381 kg

Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW  ... more information

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...