saws used for sale

Klaeger hacksaw 4B/400 workshop tool old Model: 4B/400 Machine no.: 81388 Year of construction: 1965  ... more information

Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.

Offer 24012 Specifications: - Saw blade dimensions approx. 2900 x 27 x 0.9 mm - Infinitely variable cutting speeds 18 - 105 m/min - Cutting pressure regulation - Mitre vise - Cutting area - at 90° approx. 250 mm - Square-flat 250 x 250 mm - at 45° approx. 170 mm - square-flat 170 x 170 mm - Drive 400 V / 1.3 kW - Micro spray coolant device -Mot. Chip Clearing Brush - Space requirement approx. W 1850 x H 1050 x D 850 mm - Weight approx. 450 kg

With special equipment: • Roller conveyor 3m • Minimum quantity cooling •Conveyor • Hydraulic saw blade clamping • Laser cut line indicator • Clamping force regulation on the control panel • Hydraulic bundle clamping  ... more information

With optional equipment: • Hydraulic bundle clamping • Hydraulic saw blade clamping • Roller conveyor 3m • Minimum quantity cooling • Laser cut line indicator • Clamping force regulation on the control panel  ... more information

Saw motor for Kaltenbach saw KKS 400 Engine was newly stored and front bearing plate renewed. Has been used as a replacement in maintenance. Motor repaired thus as new.  ... more information

easily used, technically tested, without base frame Cutting capacity 0° (round) 225 mm Cutting capacity 0° (square) 180 mm Cutting capacity 0° (rectangle) (length x width) 150 mm x 245 mm Cutting capacity 45° L (square) 145 mm Cutting capacity 45° L (rectangle) (width x length) 145 mm x 190 mm Cutting capacity 45° L (round) 145 mm Cutting capacity 45° R (square) 120 mm Cutting capacity 45° R (round) 120 mm Cutting capacity 45° R (rectangle) (length x width) 120 mm x 120 mm Cutting capacity 60° R (round) 90 mm Cutting capacity 60° R (square) 90 mm Cutting capacity 60° R (rectangle) (length x width) 90 mm x 115 mm Cutting speeds 45 / 90 m/min

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides  ... more information

- technically efficient, ready to work – after full service - disc diameter: 350 mm  ... more information

Cutting range round: 320 mm Cutting area square: 300 x 320 mm Saw blade dimensions: 575 x 50 x 2.5 mm Lifting speeds: 16 - 45 m/min Drive motor: 380 V, approx. 6 kW Space requirements: 1600 x 1580 x 1470 mm Weight: 1220 kg  ... more information

Bend Saw Automatic MEP SHARK SX DUTY used machine in good working condition . Price on request  ... more information

Metal band saw machine in good condition YOC 2009 Ready for immediate use at call The HBA 500 S i has a stable 2-column construction and is characterized by the best cutting performance and simple and clear control. The highest level of precision and safety is guaranteed. Thanks to the extensive range of accessories, these models can be upgraded to a machine for highly demanding automatic saws. Working range, cutting quality and performance make the HBA 500 S a top model. Standard accessories: Control DP 100 with 7" touch screen, carbide guides, motor-driven chip brush, hydraulic cutting pressure adjustment, reinforced saw frame, 34 mm band saw technology, coolant system, integrated roller conveyor 1200 mm Saw blade dimensions 4400 x 34 x 1.1 mm Weight: 2400 kg Dimensions LxWxH2200x2400x2100 mm Working height 650 mm Cutting speed15-105m/min Infinitely variable f ...

Reliable hacksaw in good condition, immediately available. Kasto EBS 400 Cutting diameter 560 mm Saw blade length 850 mm Stroke 450 mm Total power requirement 6 kW Machine weight approx. 1.2 t The machine can be viewed at any time. Take a look at our other listings. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844

Max. saw blade diameter: 350 mm Manual saw feed 2 sawing speeds Coolant lubrication  ... more information

Hacksaw with roller block and saw blades  ... more information

Specifications: Sawing area 90 ° round: 280 mm 90° flat: 280 x 160 mm 90° square: 240 x 240 mm 45° round: 180 mm 45° flat: 150 x 250 mm 45° square: 170 x 170 mm Stroke rates: 40 / 51 / 64 / 80 / 102 / 128 mm Cutting speed: 11 - 36 m/min Saw blade: 450 x 40 x 2.0 mm Material support height: 600 mm Engine power: 5 kW Dimensions (WxDxH), approx.: 750 x 1700 x 1100 mm Weight, approx.: 495 kg Equipment: - Cutting feed infinitely adjustable - Coolant device incl. pump - Roller trestle

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of delivery: -Band saw blade -Work piece stop -Base -Quick cla ...

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Cutting range 90°, round: x 64 mm Saw blade: 250 x 2.5 mm Engine power: 1.5 kW Connection: 400 V Weight, approx.: 110 kg Standard: - Saw blade of 250 x 2.5 mm - Base - CE  ... more information