saws used for sale

cutting diameter: 280 mmcapacity 90 degrees: flat: 280 x 280 mmdimensions of saw-band: 4930 mmcutting speed: 19 - 90 m/minclamping range: 295 mmdiameter: kleinste 16,0 mmfeed range: 6 - 600 mm/minvoltage: 400 Vtotal power requirement: 5,5 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 2100 x 2333 x 2065 mmFurnishing:- fully automatic metal band saw- hydraulic material clamping- Single stroke 6 - 600 mm / multiple stroke max. 9,999 mm Manual setting of the section length using the handwheel with quantity specification- smallest saw diameter 16.0 mm- minimum section length 6.0 mm- Automatic mode / single cut selectable- Infinitely variable belt speed adjustment- Stepless adjustment of the feed speed- User manuel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmsaw band length: 4930 mmtable height: 680 mmcutting width: 280 mmcapacity 90 degrees: round: 280 mmcapacity 90 degrees: flat: 280 x 280 mmcapacity 90 degrees: square: 280 mmcutting speed: 17 - 90 m/mintotal power requirement: 5,0 kWweight of the machine ca.: 1750 tdimensions of the machine ca.: 2750 x 2400 x 1850 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mmcutting diameter: 95 mmcutting capacity - round: bei 90° / 95 mmcutting capacity - square: 95 x 95 mmcutting capacity - round: bei 45° / mmcutting capacity flat: 140 x 80 mmcutting capacity - square: 45° / mmsaw blade speeds: 33/60 p. min.Drive: 1,3/1,8 kWweight of the machine ca.: 300 kgdimensions of the machine ca.: 700 x 1000 x 2050 mmCondition: ready for operation: Electric 400 Volt: Cooling equipment: Roller conveyor with measuring stop: 3000 mmSemiautomatic: Function as follows: 1. clambing material. 2-hand start: material sawing, 3. material ease. 4. Sawing unit goes back in starting position. Cooling equipment in the base, pneumatic high-speed tensioning arrangement workpiece, durable transmission, vertical guidance in dove tail guidance, mitre cuts of 45° left to 60° right, spare saw blade. Machine ready to be demonstrated - very good condition. ...

Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw-Manufacturer: Berg & Scmidt, aluminum metal circular saw with solid base frame-Saw blade: Ø 350 mm 1800/3600 rpm-Double miter: 45°-Cutting capacity-round: 90°/45°: Ø 120 | 115mm-Cutting capacity-Square 90°/45°: 200x88 | 150x80mm-Drive: 1.5/1.8 kW-Double clamping device: manual operation-Dimensions: 900/585/H1850 mm-Weight: 194 kg

Max blade diameter: 450 mm Weight: approx. 700 kg Hydropneumatic saw blade feed via 2 manual operation Pneumatic material tensioners Minimum quantity spraying device Table rotatable on both sides with rest points at 45°  ... more information

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg  ... more information

Description: FRIGGI Band Saw 2MF650 ACN Details: Type 2MF650 ACN Serial number 2511 Year of construction 1997  ... more information

Horizontal band saw / Müller HBS 230G /miter Cjkvx8b8yz with roller conveyor front/rear Cutting area - approx. 230mm Cutting area - square 230x230mm Cutting area - flat / portrait 250x230mm Cutting area - flat/flat 280x170mm At 45 degrees miter approx. 175mm At 45 degrees square 165x165mm at 45 degrees / flat / portrait 145x230mm At 45 degrees /flat 175x170mm at 60 degrees / miter round 170mm At 60 degrees /square 90x90mm At 60 degrees / tray / portrait 90x90mm At 60 degrees /flat 110x80mm Main engine / power 1,1 KW Speed range 30 - 60 m/min Band saw blade size 2700x27x0,9mm Dimensions: LxWxH 1400x800x1500mm Weight approx. 300Kg

Rotational speed: 1800/3600/min, an inspection is possible. ... more information

Description: CNC control B+S Cutting range at 90° around 320 m flat 320 x 320 mm Material replenishment machine Saw band dimensions 5095 x 34 x 1.1 mm Cutting speed 10 to 120 m/min hydr. Raising – lowering the saw frame upper stroke limit of the saw frame Cutting pressure infinitely adjustable hydr. Material vice Chip conveyor screw Coolant device Discharge roller conveyor 2500 mm Drive 400 V / 4.0 kW Accesories 1x runway 3m, chip conveyor & documentationweight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 2,400 mm

Clamping device for automatic band saw, hydraulic double vice, saw unit mounting, feed, material positioning-Upport saw unit: from automatic band saw Behringer HBP 360 A-Stroke: 675 mm-Shaft: Ø 40 mm-Measurements: see photos-Dimensions: 720/1545/H220 mm-Weight: 236 kg ... more information

Specifications: Sawing area 90 ° round: 280 mm 90° flat: 280 x 160 mm 90° square: 240 x 240 mm 45° round: 180 mm 45° flat: 150 x 250 mm 45° square: 170 x 170 mm Stroke rates: 40 / 51 / 64 / 80 / 102 / 128 mm Cutting speed: 11 - 36 m/min Saw blade: 450 x 40 x 2.0 mm Material support height: 600 mm Engine power: 5 kW Dimensions (WxDxH), approx.: 750 x 1700 x 1100 mm Weight, approx.: 495 kg Equipment: - Cutting feed infinitely adjustable - Coolant device incl. pump - Roller trestle

Hydraulic pump, hydraulic power pack, hydraulic tank-Hydraulic tank: from automatic band saw Behringer HBP 360A-Filter: Mahle industrial filters-Fill level indicator: sight glass-Dimensions: 480/600/H520 mm-Weight: 99 kg ... more information

Cutting dimensions: 400x260mm, connected load: 2.2kW, length: 2500mm, width: 1000mm, height: 1500mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible. ... more information

Specifications: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - largest opening width of the vice 145 mm - Cutting range with saw blade diameter 300 mm - at 90° about 95 mm Flat 125 x 90 mm - at 45° about 95 mm flat 95 x 85 mm - miter adjustable left to 30° + right to 45° - Saw blade speeds 40 + 80 1/min - Drive 400 V / 1.6 / 2.1 kW - Coolant device - Discharge roller gear 3000 mm - Space requirement approx. W 600 x H 1700 x D 800 mm - Weight approx. 250 kg

cutting diameter: 380 mmsaw band length: 4570 x 42 mmcutting width: 380 mmband speed: 15 - 120 m/min: 380 mm: 380 mm: 380 x 400 mmtotal power requirement: 5,6 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: 2600 x 2600 x 2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350 x Ø 40 x 3 mmcutting range: 120 mmcapacity 90 degrees: square: 100 x 100 mmcapacity 90 degrees: flat: 170 x 100 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 95 x 95 mmcapacity 45 degrees: flat: 120 x 100 mmcapacity 60 degrees: round: RE 100 mmcapacity 60 degrees: square: RE 85 x 85 mmcapacity 60 degrees: flat: RE 85 x 100 mmwork height max.: 900 mmsaw blade turning speeds: 17 / 34 U/mincompressed air: 6,0 - 8,0 bartotal power requirement: 1,4 / 1,9 kWweight: 340 kgrange L-W-H: 1010 x 765 x 2175 mmFurnishing :- semi-automatic vertical cold circular saw- Pneumatic quick clamping device- Infinitely adjustable saw blade feed- Convenient miter adjustment- Convenient stroke adjustment of the saw unit via clamping levers- Generously dimensioned gears- with Eisele rotation compensation for a long saw blade service life- Convenient saw blade chang ...

saw blade diameter: 350 mmcutting diameter: 110 mmcapacity 90 degrees: flat: 180 x 85 mmcapacity 45 degrees: round: 105 mmcapacity 45 degrees: flat: 130 x 85 mmcapacity 60 degrees: round: 105 mmcapacity 60 degrees: flat: 90 x 85 mmturning speeds: 9-18-36-74 U/minvice: max. 180 mmControl: IMET CNC total power requirement: 1,5 / 2,2 kWweight: 710 kgrange L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on requestCircular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw.Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron.Choosing the ri ...

saw blade diameter: 250 mmcutting diameter: 80 mmcapacity 90 degrees: square: 70 mmcapacity 45 degrees: square: 65 mmcapacity 90 degrees: flat: 130 x 40 mmcapacity 45 degrees: flat: 100 x 40 mmswivelling range: -45 / 90 / +30 Gradcutting speed: 2700 m/minweight of the machine ca.: ca. 60 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350x32x3,4 mm: 120 mmcapacity 90 degrees: round: 105 mmcapacity 90 degrees: flat: 180x70 mm: 120 mm: 100 mm: 135x60 mm: 110 mm: 95 mm: 135x60 mmtotal power requirement: 2,29 kWweight of the machine ca.: 530 kgdimensions of the machine ca.: 2720x1460x1740 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.