- 3-Roller Round Bending Machines (22)
- Axis Laser Processing Equipment (3)
- Beading Machines (28)
- Bending And Straightening Machines (1)
- Bending Machines (39)
- Bending Tools (17)
- Blanking Presses For Profiled Materials (1)
- Blanking Presses For Sheet Metal (2)
- Blind Rivet Tongs (1)
- Circular Shears (6)
- CNC Bending Machines (10)
- CNC Hydraulic Plate Shear (36)
- CNC Laser Cutting Machines (121)
- CNC Plasma Cutting Machines (35)
- CNC Pressbrakes (146)
- CNC Punching Machines (24)
- CNC Punching Nibbling Machines (2)
- CO2 Laser Marker (5)
- Combination Machines (1)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (6)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (17)
- Coper-Notcher With Punch For Profiled Materials (1)
- Coper-Notcher With Punch For Sheet Metal (3)
- Cutting off machines (4)
- Cutting-To-Length Lines (23)
- Deburring Machines (6)
- Decoilers (50)
- Feed Straighteners (5)
- Film Cutting Machines (1)
- Flame Cutting Units (11)
- Flanging Machines (4)
- Flat, Bar And Section Shears (3)
- Folding Machines (141)
- Gear Fine Processing Machines (1)
- Guillotine Shears (116)
- Hand Lever Shears (5)
- Hand Plate Shear (2)
- Hole Punches (67)
- Honing Machines (4)
- Hydraulic Shear (135)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (91)
- Laser engraving machines (11)
- Laser gas cutting installations (1)
- Laser Machines (14)
- Longitudinal Cutting Lines (23)
- Mandrel Bending Machines (6)
- Mandrel Pipe Bending Machines (11)
- Motorized Beading Machines (12)
- Motorized Plate Bending Machines (23)
- Motorized Shears (16)
- Nibbling Machines (3)
- Notching Machines (58)
- Other Combined Sheet Metal Working Machines (2)
- Other Metal Forming Machines (2)
- Other Sheet Metal Working Shears (2)
- Other Wire Working Machines (1)
- Pipe Bending Machines (3)
- Pipe Drawing Machines (5)
- Pipe Manufacturing Machines (14)
- Plasma Cutters (11)
- Plasma Cutting Machines (20)
- Plasma Cutting Presses (1)
- Plate And Section Shears (3)
- Plate Edge Pre-Bending Machines (4)
- Profile Bending Machines (32)
- Profile Steel Cutters (58)
- Profiling Machines (15)
- Profiling Systems (5)
- Punches (7)
- Punching Machines (66)
- Recoilers (6)
- Reel Straightening Units (2)
- Reels (7)
- Ring Bending Machines (41)
- Roll Bending Machines (19)
- Rotary Shears (1)
- Round Bending Machines (101)
- Section round bending machines (4)
- Shears For Profiled Materials (2)
- Shears For Sheet Metal Working (14)
- Sheet Metal Bending Machines (29)
- Sheet metal blowroom machines (23)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (5)
- Sheet Metal Deburring Machines (16)
- Sheet Metal Die (1)
- Sheet Metal Machining Centres (12)
- Sheet Metal Punching, Nibbling And Forming Machines (7)
- Sheet Metal Shears (44)
- Sheet Metal Straightening Machine (4)
- Sheet Notching Machines (1)
- Sheet Strip Feed Leveler (1)
- Smooth planer (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Straighteners (19)
- Tape Straightening Machines (10)
- Three-roll plate bending machines (12)
- Tube Bending Machines (66)
- Universal bending machines (2)
- Universal CNC Bending Machines (2)
- Universal Lockforming (4)
- Volume bending machines (2)
- Water Jet Cutting Machines (22)
- Wire And Strip Working Machines (2)
- Wire Coiling And Winding Machines (9)
- more
- A+B (1)
- A+B ERBEND (2)
- A+B FASTECH (1)
- AB BACKTEMANS (1)
- ABWICKELHASPEL (1)
- ACD (1)
- ACF (1)
- ACHENBACH, INNSE/MINO (1)
- ADGIE (1)
- ADIGE (7)
- ADIGE SYS (1)
- ADIRA (3)
- AEF (1)
- AGOTHA WMW (1)
- AIR LIQUIDE (1)
- AIRLIQUIDE (1)
- AJAN (29)
- AJIAL (1)
- AK BEND (27)
- AK-BEND (29)
- Akbend (3)
- AKV 2238 (1)
- AKYAPAK (34)
- Alba (2)
- ALCOS (1)
- ALFA IN (1)
- ALFATEC (1)
- ALFHATECH (1)
- ALFRA (1)
- ALIKO (1)
- ALMI (8)
- ALMORE (1)
- Alpha (2)
- Alu (2)
- AMADA (137)
- AMADA PROMECAM (3)
- AMADA SCHIAVI (4)
- AMC (1)
- AMG (1)
- AMT (2)
- Antil (2)
- API (1)
- Apollo (4)
- aps (3)
- APSA (1)
- ARCO (1)
- ARKU (3)
- ARRIETA (1)
- ARTMANN HAMBURG (1)
- ARTWELDING GMBH (1)
- ASC TRIM (1)
- ASH (1)
- ASSFALG (1)
- Assistmach (34)
- ATHADER (1)
- ATLANTIC (15)
- ATLANTIC / HACO (1)
- ATS (4)
- AUERBACH (1)
- AUSKLINKWERKZEUG (1)
- AUTOMATIC LETTER BENDER (1)
- AUXMET HASPEL (1)
- AWEA (1)
- AWM (1)
- AXIAL (1)
- AYEL-TECH (21)
- BACH (1)
- BACH APOLDA (1)
- BAD SALZUNGEN (4)
- BAIER (1)
- BAILEIGH (2)
- Balliu (2)
- BANNING (1)
- BARBERAN (1)
- BAUST (1)
- Baykal (39)
- BBM (2)
- Behrens (2)
- BEIJING YC DIGITTECH (1)
- BEIL (1)
- BEM BERLIN-ERFURTER MASCHINENFABRIK (1)
- BEMA (6)
- BENDMAK (5)
- Bernardo (20)
- BETSCHKE WEGERHOFF (1)
- BEUTNER (1)
- BEYELER (36)
- BEYELER, (1)
- BEYLER (1)
- BIEGEMASTER (22)
- BIEGEROLLEN (1)
- Bihler (7)
- BIKO (1)
- BIRIO (1)
- Birlik (2)
- BIRLIK MAKINA (1)
- BL (1)
- BLAAHOLM (1)
- BLEKEN (1)
- BLEMAS (2)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 107)
New in: 1981
used
Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. ... more information
New in: 1990
used
Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices. ... more information
New in: 1990
used
Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm. ... more information
New in: 2001
used
Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter. ... more information
used
Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible. ... more information
New in: 1977
used
Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation. ... more information
New in: 1978
used
Pressing force: 40t, stroke adjustment: 13-57mm, ram adjustment: 60mm, stroke speed: 60-1200/min, connected load: 15kW, weight: 6t, with documentation, an inspection is possible. ... more information
New in: 1994
used
Max. punching force: 240kN, working area: 1250-2500x550-1100mm, weight: 3.5t, available die diameter round: 3.1/ 4.1/ 4.2/ 5.2/ 6.5/ 8.2/ 10/ 11/ 12/ 13/ 16/ 17mm, longitudinal: 9x16/ 9x20mm, with documentation, an inspection is possible. ... more information
used
Working width: 2040mm, max. sheet thickness: 4mm, weight: 1.8t, an inspection is possible. ... more information
New in: 1994
used
Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible.
New in: 1986
used
Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. ... more information
New in: 1999
used
Max. pressing force: 850kN, max. stroke: 365mm, compressed air supply: 6bar, connected load: 14kVA, weight: 9.95t, with documentation, without tools, was maintained regularly, an inspection is possible. ... more information
used
Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.
New in: 1998
used
Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible. ... more information
New in: 2010
used
Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.
New in: 2018
used
Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm ... more information
New in: 2007
used
There are 2 notching machines available. Rotox SAF 165, year of manufacture: 2007, saw blade diameter: 250mm, speed: 2800rpm, pressure: 6-7bar, weight: 273kg. Hanning BVH8K2, speed: 2700rpm. ... more information
New in: 1998
used
There are 3x punch rivet feeders and 2x C-pliers Böllhoff available. Self-pierce rivet feeder: 2x ABF, 1x LG, years of construction: 1998-2003, rivets: 3x4mm and 3x5mm. C-tongs: Year of manufacture: 1998, max. rivet setting pressure: 250bar, max. rivet setting force: 50kN. Documentation available. On-site inspection is possible.
New in: 2013
used
Max. Sheet thickness: 8mm, max. cutting force: 220kN, laser power: 2700W, C-axis punching: 330rpm, max. stroke rate marking: 2800rpm. Tool rotation: 360°, punching tool size: 76.2mm, max. tool change time: 0.3s, punching/laser part flap size: 500mm x 500mm. Documentation available. ... more information
New in: 2004
used
Working width: 3200mm, max. sheet thickness at 400N/mm² with bending tool width 30mm: 4mm, min. bending radius: 1.25xsheet thickness, min. inner flange height: approx. 6xsheet thickness. Inner flange height: approx. 6xsheet thickness. Max. Opening height of upper beam: 400mm, max. adjustment range of bending and lower beam: 80mm, bending angle: 0°-180°, max. bending speed: 74°/s. Clamping speed upper beam DOWN/UP: 40mm/92mm, weight: approx. 5500kg, control: RAS System 6000, documentation available.