subcategories
(3rd category level)
Manufacturer:
(Category: 107)
CTO 400 Piesok press brake from 1981 for sale. (pressure 400t) The piston rod is damaged and has a micro-crack. We have dies and punches in various sizes for it - prices to be agreed. The total weight of the press is approximately 39t. ... more information
pressure: 80 tchamfer lenght: 2550 mmdistance between columns: 2050 mmControl: keine stroke: 250 mmlight barrier: SICK The machine was previously equipped with a CNC control,now converted to electrically manual operation.Digital display for backgauge.electrical stroke adjustmentMachine is functional and has been used sporadically for the past 15 years, as previous owner preferred to use a folding machine.tools included:1 set of upper tool1 lower tool (die block)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sell COLGAR 8100 mm / 450 Ton CNC press brake The construction of the machine was made of high quality materials, which ensure many years of safe operation of the machine. The device is 100% operational. In very good technical condition. The machine connected to the network, in constant use. Year of construction : 1981 After a comprehensive modernization of the control carried out in 2018 Control : CNC in 3 axes Y, X, R Press force: 450 tons Bending length: 8100 mm Distance between columns : 6100 mm Notch in columns 400 mm Bending height: 580 mm Stroke 250 mm Machine width: 2200 mm Height of the machine 4300 mm Machine weight: 58 tons Main motor power: 30 kW
lechrichter, used,      sheet leveller, used,  Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm   min. sheet thickness / min. sheethickness: 3 mm  Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of    straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...
sheet width - max.: 1255 mmplate thickness: 4,0 mm STplate thickness: 2,0 mm VAplate thickness: 6,0 mm ALUnumber of strokes - loaded: ~ 66 Hübe/min.cutting angle: 1,5 °total power requirement: 5,5 kWweight of the machine ca.: 2600 kg.range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition ()Furnishing:- electro-hydraulic guillotine shears- manual backgauge with analogue position display (scale + magnifying glass)- electrical cutting length limitation- manual cutting gap adjustment- 1x extra long side stop- 2x extra long support arms- 1x free moving footswitch- rear sheet metal slide- User manual (PDF) Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325278The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4,0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 300 mmcoil weight: 1 tcoil internal dia.: 350-450 mmweight of the machine ca.: 0,5 tdimensions of the machine ca.: BxTxH 1500x1500x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
sheet width: 300 mmcoil weight: 1 tcoil internal dia.: 350-450 mmweight of the machine ca.: 1 tdimensions of the machine ca.: BxTxH 1500x1500x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
material width: 1550 mmmaterial thickness: 2,50 mmno. of straightening rolls: 21 sheet thickness - min.: 0,60 mmdiam. of the rolls ca.: 49,46 mmwork speed: 9,3 / 18,6 m/minbarrel length ca.: 1775 mmNo. of supports up/down: je 7 -fach No. of support rolls: 161 total power requirement: 29 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 5,10 x 1,60 x 2,35 m- Infeed and outfeed table- Roller removal device- Control panel attached to the straightening machine- Switch cabinet- Box with 11 spare rollers with a diameter of 49.46 mm- Electric motorized crowning at the bottom- Height adjustment by electric motor- Swivel/tilt device electric motor- ReversibleSwitch cabinet:Weight 150kgL x W x H: 1.20 x 0.40 x 2.10 mTable with conveyor belt:Weight 300kgL x W x H: 3.70 x 2.10 x 0.90 mRollebach:Weight 200kgL x W x H: 2.80 x 1.60 x 0.85 m1 box of straightening rollers - 11 piecesL x W x ...
sheet width: 2000 mmplate thickness: 4,0 mmdistance between columns: 2050 mmroll diameter: 160 mmtotal power requirement: KWweight of the machine ca.: 2,75 tdimensions of the machine ca.: 3,6 x 1,2 x 1,3 mmSheet metal bending machine 3 rollersincl. foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition. Max. sheet length: 2050 mm Max. sheet thickness: 4 mm. Upon prior agreement, the possibility of an inspection in progress. ... more information
material width:203 mmmaterial thickness:0,1 - 1,9 mmfeed length:101 mmweight:0,1 tdimensions (WxDxH):0,5 x 0,8 x 0,5 m ... more information
Offer 23476 Specifications: - Max. working width 1020 mm - max. material thickness 3.0 mm - Cutting angle 2.7° - electr. Footswitch - Single stroke – continuous stroke can be pre-selected - Manual backgauge up to 500 mm - Front pull-out sheet metal support - Drive 400 V / 2.5 kW - Space requirement approx. W 1450 x H 1200 x D 1400 mm - Weight approx. 900 kg
Specifications: - Pressure capacity 450 KN - perforates e.B. up to 25 mm Ø in steel 15 mm - Stroke infinitely adjustable 0 to 60 mm - Stroke rate approx. 16 to 47 1/min - Projection 760 mm - Installation height 215 mm - Working height 1150 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces of various punches + dies
The machine is in good technical condition. Max. length of cut sheet: 3000mm Max. thickness of cut sheet: 12mm Dimensions LxWxH: 3600 x 1600 x 1900mm Weight: 8300kg By prior arrangement, the possibility of a tour in progress. ... more information
The machine is in good technical condition. Cutting length 2500 mm The thickness of the cut sheet is 8 mm Steel shear strength 45 kp/mm2 Discharge 300 mm Adjustable angle 2°30- 1°20 Engine 18.5 kW; 1500 U/min El. control pump motor 1.5 kW; 1500 U/min Maximum working pressure 285 kp/cm2 Oil tank volume 225 l Length 3115 mm Width 3078 mm Height 1855 mm Weight approx. 7650 kg
Knee lever shears for sheet metal Cutting length 15 cm maximum sheet thickness 3 mm Built in 1982 L x W x H: 50 x 40 x 150 cm Weight approx. 50 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Manufacturer SMT-Pullmax Kumla Model PV 7 H Year 1982 Working length : 3000 mm Max. thickness : 25 mm ... more information
- Flat steel shear cuts flat up to 100 x 18 mm - Knife length approx. 250 mm - Profile steel scissors cut angles 90° to 100 x 10 mm 45° to 70 x 8 mm - Bar steel shear cuts round steel 90° to 36 mm Square steel 90° to 30 mm - Notching device sheets up to 8 mm - Hole punch - Pressure capacity approx. 50 t - Projection 350 mm - punched in steel up to 20 mm Ø in 15 mm - Drive 400 V / 3 kW - Space requirement approx. W 1100 x H 1700 x D 2300 mm - Weight approx. 1900 kg