- 3-Roller Round Bending Machines (21)
- Axis Laser Processing Equipment (3)
- Beading Machines (28)
- Bending And Straightening Machines (1)
- Bending Machines (39)
- Bending Tools (16)
- Blanking Presses For Profiled Materials (1)
- Blanking Presses For Sheet Metal (2)
- Blind Rivet Tongs (1)
- Circular Shears (7)
- CNC Bending Machines (10)
- CNC Hydraulic Plate Shear (33)
- CNC Laser Cutting Machines (118)
- CNC Plasma Cutting Machines (35)
- CNC Pressbrakes (147)
- CNC Punching Machines (27)
- CNC Punching Nibbling Machines (7)
- CO2 Laser Marker (3)
- Combination Machines (1)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (9)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (17)
- Coper-Notcher With Punch For Profiled Materials (1)
- Coper-Notcher With Punch For Sheet Metal (3)
- Cutting off machines (4)
- Cutting-To-Length Lines (22)
- Deburring Machines (6)
- Decoilers (59)
- Feed Straighteners (7)
- Film Cutting Machines (1)
- Flame Cutting Units (5)
- Flanging Machines (4)
- Flat, Bar And Section Shears (3)
- Folding Machines (139)
- Gear Fine Processing Machines (1)
- Guillotine Shears (108)
- Hand Lever Shears (6)
- Hand Plate Shear (3)
- Hole Punches (64)
- Honing Machines (4)
- Hydraulic Shear (128)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (89)
- Laser engraving machines (11)
- Laser Machines (13)
- Longitudinal Cutting Lines (22)
- Mandrel Bending Machines (5)
- Mandrel Pipe Bending Machines (9)
- Motorized Beading Machines (12)
- Motorized Plate Bending Machines (22)
- Motorized Shears (18)
- Nibbling Machines (5)
- Notching Machines (63)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (2)
- Other Sheet Metal Working Shears (2)
- Other Wire Working Machines (1)
- Pipe Bending Machines (3)
- Pipe Drawing Machines (5)
- Pipe Manufacturing Machines (15)
- Plasma Cutters (2)
- Plasma Cutting Machines (18)
- Plasma Cutting Presses (1)
- Plate And Section Shears (3)
- Plate Edge Pre-Bending Machines (4)
- Profile Bending Machines (34)
- Profile Steel Cutters (60)
- Profiling Machines (15)
- Profiling Systems (5)
- Punches (7)
- Punching Machines (56)
- Recoilers (6)
- Reel Straightening Units (2)
- Reels (12)
- Ring Bending Machines (40)
- Roll Bending Machines (20)
- Rotary Shears (1)
- Round Bending Machines (107)
- Section round bending machines (4)
- Shears For Profiled Materials (1)
- Shears For Sheet Metal Working (14)
- Sheet Metal Bending Machines (28)
- Sheet metal blowroom machines (21)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (5)
- Sheet Metal Deburring Machines (17)
- Sheet Metal Die (1)
- Sheet Metal Machining Centres (13)
- Sheet Metal Punching, Nibbling And Forming Machines (8)
- Sheet Metal Shears (44)
- Sheet Metal Straightening Machine (4)
- Sheet Notching Machines (1)
- Sheet Strip Feed Leveler (1)
- Smooth planer (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Straighteners (22)
- Tape Straightening Machines (10)
- Three-roll plate bending machines (13)
- Tube Bending Machines (62)
- Universal CNC Bending Machines (4)
- Universal Lockforming (4)
- Volume bending machines (2)
- Water Jet Cutting Machines (21)
- Wire And Strip Working Machines (2)
- Wire Coiling And Winding Machines (9)
- more
- A+B (1)
- A+B ERBEND (2)
- A+B FASTECH (1)
- AB BACKTEMANS (1)
- AB DELLNER, MALMOE (1)
- ABWICKELHASPEL (1)
- ACD (1)
- ACF (1)
- ACHENBACH, INNSE/MINO (1)
- ACL (1)
- ADGIE (1)
- ADIGE (7)
- ADIGE SYS (1)
- Adira (3)
- AEF (1)
- AGOTHA WMW (1)
- AIRLIQUIDE (1)
- AJAN (28)
- AJIAL (1)
- AK BEND (24)
- AK-BEND (29)
- Akbend (2)
- AKV 2238 (1)
- AKYAPAK (35)
- Alba (2)
- ALFA IN (1)
- ALFATEC (1)
- ALFHATECH (1)
- ALFRA (1)
- ALIKO (1)
- ALMI (8)
- ALMORE (1)
- ALP (1)
- Alpha (2)
- Alu (2)
- ALUMINIUMBLECHE (1)
- AMADA (138)
- AMADA PROMECAM (3)
- AMADA SCHIAVI (4)
- AMC (1)
- AMG (1)
- AMT (3)
- ANTIL (1)
- API (1)
- Apollo (4)
- aps (3)
- ARCO (1)
- ARKU (4)
- ARRIETA (1)
- ARTWELDING GMBH (1)
- ASC TRIM (1)
- ASH (1)
- Assistmach (34)
- ATHADER (1)
- ATLANTIC (14)
- ATLANTIC / HACO (1)
- ATS (4)
- AUERBACH (1)
- AUSKLINKWERKZEUG (1)
- AUTOMATIC LETTER BENDER (1)
- AUXMET HASPEL (1)
- AWM (1)
- AXIAL (2)
- AYEL-TECH (21)
- BACH (1)
- BACH APOLDA (1)
- BAD SALZUNGEN (4)
- BAILEIGH (2)
- Balliu (2)
- BANNING (1)
- BARBERAN (1)
- BAUST (1)
- Baykal (46)
- BBM (2)
- BBT (1)
- Behrens (2)
- BEIJING YC DIGITTECH (1)
- BEIL (1)
- BEM BERLIN-ERFURTER MASCHINENFABRIK (1)
- BEMA (5)
- BENDMAK (5)
- Bernardo (21)
- BETSCHKE WEGERHOFF (1)
- BEUTNER (1)
- BEYELER (30)
- BEYELER, (1)
- BIEGEMASTER (22)
- BIEGEROLLEN (1)
- BIHLER (1)
- BIKO (1)
- BIRIO (1)
- Birlik (2)
- BIRLIK MAKINA (1)
- BL (1)
- BLAAHOLM (1)
- BLEKEN (1)
- BLEMAS (2)
- BLISS (1)
- BLM (3)
- BLM ADIGE (3)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 107)
New in: 1964
used
sheet width: 2000 mmplate thickness: 1 mmdistance between columns: 2100 mmtotal power requirement: 6 kWweight of the machine ca.: 0,39 tMaximum bending length 2000 mmMachine height 1200 mmMachine length 2400 mmMachine width 1000 mmMachine weight 0,39 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1964
used
Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.
New in: 1964
used
950 € Description: Technical details: sheet width 2000 mm, sheet thickness 1 mm, stand width 2100 mm, total power requirement 6 kW, additional information: maximum folding length 2000 mm, machine height 1200 mm, machine length 2400 mm, machine width 1000 mmweight approx.: 390 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,000 x 1,200 mm
New in: 1964
used
groove width: 50 mmdrawing length: 320 mmworking speed: m/minpressure: 3 tworking length: 320 mmworking width: 30 mmCapacity: 3 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSimple hydr. key seating machine with toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1964
used
Machine Type: Guillotine Shears Manufacturer: SCHARRINGHAUSEN Model No.: HS-III Year of construction: 1964 Condition: good Offer Type: Used Machine Specifications: Capacity: 2050 x 3.0 mm Drive type: el./mech. Propulsion: 5.5 kW Remark: backgauge, El. foot release, front stop rail, Machine feet Weight: 2700 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
New in: 1964
used
Seam closer Schechtel MS Manual Length 1 m ... more information
New in: 1964
used
Make HAEUSLER Type VRM 1500 x 5 Year of construction 1964 Control conventional Sheet width 1500 mm Sheet thickness 5 mm Prebending 4 Upper roll diameter 185 mm Lower roll diameter 185 mm Side roll diameter 145 mm Dimensions of the machine L x W x H 4.0 x 1.23 x 1.6 m - Conical bending device - pneum. Folding stock
New in: 1964
used
Guillotine shears, sheet metal shears, sheet metal shears, hydraulic shears, hydraulic shears-Guillotine shears: hydraulic-Cutting width: 2580 mm-Max. Cutting thickness: steel 2 mm / aluminum 3 mm-Projection: 540 mm-Dimensions: 3020/2000/H1320 mm-Transport dimension: 3020/2000/1320 mm-Weight: 3185 kg
New in: 1965
used
Machine Type: Swivel Bending Machine Manufacturer: RAS Model: 61.1 Year of construction: 1965 Condition: good Offer Type: Used Machine Specifications: Capacity: 1020 x 1.5 mm Drive type: manual Remark: Material support at the back Weight: 220 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
New in: 1965
used
Usable length 2,000 mm Max. sheet thickness for mild steel 2.5 mm Opening width of the upper beam 250 mm Drive power of the bending beam 5.5 kW ... more information
New in: 1965
used
Working width: 2500 mm sheet thickness: 4 mm throat depth: 70 mm rear gauge: 520 mm power: 380 V, 6.3 kW space: 3200 x 2300 x 1270 mm weight: 4600 kg ... more information
New in: 1965
used
Machine type: guillotine shears Manufacturer: LOTZE Model: KSS HY/3040 x 7 Year of construction: 1965 Condition: good Type of offer: used machine Specifications: Power: 3040 x 7.0 mm Drive type: el./hydr. Drive: 12.5 kW Remark: rip fence, Front gauge, Material requirements Weight: 7500 kg The machine is in a good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.
New in: 1965
used
1.950 € Description: serial number: 275 , workpiece thickness: 3 mm workpiece length: 2060 mm plate thickness: 3 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,300 x 2,100 mm ... more information
New in: 1965
used
Ungerer leveler Used machine visible in Italy, sold as it is ... more information
New in: 1966
used
Axis diameter: 95 double T-iron on the x-axis: mmU-iron on the x-axis: mmT - beam - web outwards: mmchannels - flange: angle steel/side length: mmsquare bar steel: mmperipheral speed: m/mintotal power requirement: KWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 1,6 x 1,5 x ,9 mProfile bending machine with:- 3 driven axles- Box with tools- Emergency stop facilityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1966
used
sheet width: 2540 mmplate thickness: 8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
New in: 1966
used
sheet width: 2550 mmplate thickness: 6 mmweight of the machine ca.: 3,9 t: Rollensatz für Rohrwalze The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
New in: 1966
used
Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system
New in: 1966
used
Working width: 5050 mm thickness: 10 mm power: 30 kW space: 2450 x 5600 x 2500 mm weight: 28000 kg ... more information
New in: 1966
used
Manufacturer: HUTA ZIGMUNT, Poland Serial No. 167931/2, year of issue 1966 Dimensions LxWxH: 14340x5950x4540 mm, weight 403000 kg Basic data: Straightened sheet thickness - 12-30 mm Straightened sheet width - 3000 mm Material yield strength – 80 kg/mm2 Dressing speed - 12 m/min Working rollers: - 7pcs, f 500mm, L barrels - 3550mm Pitch between the axes of the rollers - 510mm Support rollers: - 10pcs, f500ii, L barrels - 670mm Guide rollers - 2 pieces Main drive motor: AK 112-8, 160 kW, 730 rpm. Top bed travel speed - 16.2 mm/min Bearings: working and supporting rollers - rolling The machine is reversible.