sheet metal working used for sale

material width:250 mmmaterial thickness:0,4 - 3,5 mmno. of straightening rolls:9 straightening roll diameter:30 mmspeed:3 - 15 m/minmaterial thickness at 250 mm material width:3,0 mmmaterial thickness at 200 mm material width:3,5 mmpower capacity:1,8 kWweight:0,9 tDimensions (WxDxH):1,45 x 1,4 x 1,55 m

material width:200 mmmaterial thickness:0,8 - 3,0 mmno. of straightening rolls:6 straightening roll diameter:53 mmnumber of draw-in rolls:2 diameter of draw-in rolls:96 mmmaterial cross-cut:400 mm²speed:3 - 15 m/minpower capacity:0,75 kWweight:0,5 tDimensions (WxDxH):1,0 x 1,0 x 1,4 m ... more information

bending radius min.: 10 - 300 mmBending Angle: 0 - 180 °0: 1,25 / 2,6 U/minMotor Capacity: 1,5 kWweight: 135 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

material width:300 mmcoil weight:2 x 1,25 tmaterial thickness:0,4 - 1,2 mmcoil internal diameter:320 - 420 mmcoil external diameter:1300 mmno. of straightening rolls:9 straightening roll diameter:30 mmnumber of draw-in rolls:2 roll diameter:30 mmspeed:3 - 30 m/minfeed length:0 - 9999,9 mmpower requirement:3,0 + 2,5 kWweight of decoiler:0,7 tdimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mmweight of straightening machine:0,45 tdimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mmweight of the feeder:0,4 tdimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mmuniversal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

weight of the machine ca.:620 kgdimensions of the machine ca.:1000 x 920 x 1550 mm ... more information

material width:150 mmcoil weight:1,5 tcoil internal diameter:500 mmcoil external diameter:940 mmstrip material:20 x 1,0 - 50 x 4,0 / 200 x 2,0 mmwire diameter:1,0 - 5,0 mmpower requirement:0,7 kWweight:0,7 tDimensions (WxDxH):1,0 x 1,7 x 2,0 mpalett decoiler:motoric driven  ... more information

: neu : 2024 : 9731 : Juni 2024, Zwischenverkau : Türkei : 30100 €: 611.03 €: 1 : 3100 mm: 4 mm: 42 1/min: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness:3 mmtotal power requirement:4 kWweight of the machine ca.:0,85 tdimensions of the machine ca.:1,2 x 1,0 x 1,1 mNotching machine hydraulic ... more information

material width:300 mmcoil weight:0,5 tmaterial thickness:0,4 - 3,0 mmcoil internal diameter:420 - 520 mmcoil external diameter:1200 mmno. of straightening rolls:9 straightening roll diameter:50 mmnumber of draw-in rolls:2 diameter of draw-in rolls:50 mmpower requirement:1,5 kWweight:1,55 tdimensions (WxDxH):2,5 x 1,2 x 1,8 m

Worksheet 1020mm ... more information

material width:500 mmmaterial thickness:0,2 - 3,8 mmfeed length:0 - 9999,9 mmnumber of rolls:2 material cross-cut:128 mm²speed:60 m/minpower requirement:2,0 kWdimensions (WxDxH):1,2 x 1,3 x 1,5 mroll feed:Servo control:Siemens S 7, modification 2002  ... more information

Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and  ...

Slitting line HJ Loop 1600mm x 9mm x 50,000Lb (A3790) for longitudinal cutting of coil metal into strips of required width up to 9mm metal thickness Year of Manufacture: 2002 Make: HJ ENG,KOREA Raw Material: HR Coil Tensile Strength: Max. 50Kg/mm2 Yield Strength: Max. 30Kg/mm2 Coil Thickness: Min. 1.2mm ~ Max. 9.5mmT Coil Width: Min. 400mm ~ Max. 1,650mm Coil Weight: Max. 25,000Kg Coil Inside Diameter: 508mm Coil Outside Diameter: Min. ∅1,000mm ~ Max. ∅2,000mm LINE DATA Line Speed: Max. 150/80m/min Threading Speed: Max. 20m/min Slitting System: Pull & Drive Cutting by DC Power Control Slitting Width: Min. 40mm ~ Max. 1,300mm Slitting Number: Max. 30Cuts x 29Strips Pass Line Height: 900mm Line Threading Direction: Left To Right Coil Car With Coil Skid Uncoiler Coil Peeler Coil Opener Three(3) Bending Roll No.1 Pinch Roll Crop Shear with Guide Table Si ...

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 progr ...

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for si ...

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinu ...

STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts  ...

 ... more information