- (10)
- 3-Roller Round Bending Machines (21)
- Axis Laser Processing Equipment (3)
- Beading Machines (28)
- Bending And Straightening Machines (1)
- Bending Machines (39)
- Bending Tools (16)
- Blanking Presses For Profiled Materials (1)
- Blanking Presses For Sheet Metal (2)
- Blind Rivet Tongs (1)
- Circular Shears (7)
- CNC Bending Machines (10)
- CNC Hydraulic Plate Shear (33)
- CNC Laser Cutting Machines (118)
- CNC Plasma Cutting Machines (35)
- CNC Pressbrakes (147)
- CNC Punching Machines (27)
- CNC Punching Nibbling Machines (7)
- CO2 Laser Marker (3)
- Combination Machines (1)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (9)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (17)
- Coper-Notcher With Punch For Profiled Materials (1)
- Coper-Notcher With Punch For Sheet Metal (3)
- Cutting off machines (4)
- Cutting-To-Length Lines (22)
- Deburring Machines (6)
- Decoilers (59)
- Feed Straighteners (7)
- Film Cutting Machines (1)
- Flame Cutting Units (5)
- Flanging Machines (4)
- Flat, Bar And Section Shears (3)
- Folding Machines (138)
- Gear Fine Processing Machines (1)
- Guillotine Shears (108)
- Hand Lever Shears (6)
- Hand Plate Shear (3)
- Hole Punches (64)
- Honing Machines (4)
- Hydraulic Shear (128)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (89)
- Laser engraving machines (11)
- Laser Machines (13)
- Longitudinal Cutting Lines (22)
- Mandrel Bending Machines (5)
- Mandrel Pipe Bending Machines (9)
- Motorized Beading Machines (12)
- Motorized Plate Bending Machines (22)
- Motorized Shears (18)
- Nibbling Machines (5)
- Notching Machines (63)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (2)
- Other Sheet Metal Working Shears (2)
- Other Wire Working Machines (1)
- Pipe Bending Machines (3)
- Pipe Drawing Machines (5)
- Pipe Manufacturing Machines (15)
- Plasma Cutters (2)
- Plasma Cutting Machines (18)
- Plasma Cutting Presses (1)
- Plate And Section Shears (3)
- Plate Edge Pre-Bending Machines (4)
- Profile Bending Machines (34)
- Profile Steel Cutters (59)
- Profiling Machines (15)
- Profiling Systems (5)
- Punches (7)
- Punching Machines (54)
- Recoilers (6)
- Reel Straightening Units (2)
- Reels (12)
- Ring Bending Machines (40)
- Roll Bending Machines (20)
- Rotary Shears (1)
- Round Bending Machines (104)
- Section round bending machines (4)
- Shears For Profiled Materials (1)
- Shears For Sheet Metal Working (14)
- Sheet Metal Bending Machines (28)
- Sheet metal blowroom machines (21)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (5)
- Sheet Metal Deburring Machines (17)
- Sheet Metal Die (1)
- Sheet Metal Machining Centres (13)
- Sheet Metal Punching, Nibbling And Forming Machines (8)
- Sheet Metal Shears (44)
- Sheet Metal Straightening Machine (4)
- Sheet Notching Machines (1)
- Sheet Strip Feed Leveler (1)
- Smooth planer (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Straighteners (21)
- Tape Straightening Machines (10)
- Three-roll plate bending machines (13)
- Tube Bending Machines (62)
- Universal CNC Bending Machines (4)
- Universal Lockforming (4)
- Volume bending machines (2)
- Water Jet Cutting Machines (21)
- Wire And Strip Working Machines (2)
- Wire Coiling And Winding Machines (9)
- more
- A+B (1)
- A+B ERBEND (2)
- A+B FASTECH (1)
- AB BACKTEMANS (1)
- AB DELLNER, MALMOE (1)
- ABWICKELHASPEL (1)
- ACD (1)
- ACF (1)
- ACHENBACH, INNSE/MINO (1)
- ACL (1)
- ADGIE (1)
- ADIGE (7)
- ADIGE SYS (1)
- Adira (3)
- AEF (1)
- AGOTHA WMW (1)
- AIRLIQUIDE (1)
- AJAN (28)
- AJIAL (1)
- AK BEND (24)
- AK-BEND (29)
- Akbend (2)
- AKV 2238 (1)
- AKYAPAK (35)
- Alba (2)
- ALFA IN (1)
- ALFATEC (1)
- ALFHATECH (1)
- ALFRA (1)
- ALIKO (1)
- ALMI (8)
- ALMORE (1)
- ALP (1)
- Alpha (2)
- Alu (2)
- ALUMINIUMBLECHE (1)
- AMADA (138)
- AMADA PROMECAM (3)
- AMADA SCHIAVI (4)
- AMC (1)
- AMG (1)
- AMT (3)
- ANTIL (1)
- API (1)
- Apollo (4)
- aps (3)
- ARCO (1)
- ARKU (4)
- ARRIETA (1)
- ARTWELDING GMBH (1)
- ASC TRIM (1)
- ASH (1)
- Assistmach (34)
- ATHADER (1)
- ATLANTIC (14)
- ATLANTIC / HACO (1)
- ATS (4)
- AUERBACH (1)
- AUSKLINKWERKZEUG (1)
- AUTOMATIC LETTER BENDER (1)
- AUXMET HASPEL (1)
- AWM (1)
- AXIAL (2)
- AYEL-TECH (21)
- BACH (1)
- BACH APOLDA (1)
- BAD SALZUNGEN (4)
- BAILEIGH (2)
- Balliu (2)
- BANNING (1)
- BARBERAN (1)
- BAUST (1)
- Baykal (46)
- BBM (2)
- BBT (1)
- Behrens (2)
- BEIJING YC DIGITTECH (1)
- BEIL (1)
- BEM BERLIN-ERFURTER MASCHINENFABRIK (1)
- BEMA (5)
- BENDMAK (5)
- Bernardo (21)
- BETSCHKE WEGERHOFF (1)
- BEUTNER (1)
- BEYELER (30)
- BEYELER, (1)
- BIEGEMASTER (22)
- BIEGEROLLEN (1)
- BIHLER (1)
- BIKO (1)
- BIRIO (1)
- Birlik (2)
- BIRLIK MAKINA (1)
- BL (1)
- BLAAHOLM (1)
- BLEKEN (1)
- BLEMAS (2)
- BLISS (1)
- BLM (3)
- BLM ADIGE (3)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 107)
New in: 2008
used
Working hours laser on: 57785 (23.03.2022) h Working hours beam on: 40160 (23.03.2022) h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 11100 mm Width: 4600 mm Height: 2400 mm Machine weight: 12000 kg Electrical connected load: 105 kVA
New in: 2012
used
max. working width: 1000 mm workable material thickness: 0,5 - 120 mm Working hours machine: h Total power: 98 A Total current consumption: 45 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3790 kg
New in: 2007
used
Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA
New in: 1981
used
Working width: 2000mm, weight: 1.65t. ... more information
New in: 2003
used
Description: Serial Number: A15.564 CNC : TRUMPF Main Drive , Punching Force : 180 KN Max. sheet thickness: 6.4 mm Strokes: , ,X-AXIS: 1250 mm ,Y-AXIS: 1280 mm Max. workpiece thickness , Steel: 4 MM Max. workpiece weight: 75 kg , Max. workpiece height: 38 mm , Programmable force: 4000-17000kn Speeds: , X-axis: 90 m/min Y-axis: 60 m/min Simultaneous: 108 m/min Power: 400 V / 50 HZ Installed power: 17 KVA Important note: , The machine is currently stored as shown in pictures 5-12. ,max. punching diameter: 76 mm, weight approx.: 9,200 kg, Approx. Onsite Dimension. (l x w x h): 5,530 x 2,300 x 2,255 mm
New in: 1988
used
Punching force: 630kN, stroke adjustment: 10-80mm, ram adjustment: 80mm, stroke speed: 65-400/min, connected load: 11kW, length: 1590mm, width: 1650mm, height: 3000mm, weight: 9.5t, with documentation. ... more information
New in: 2020
used
Description: .DIMECO R 693 J+ sheet metal straightening machine y.o.m 2020! - Number of straightening rollers 17 - Number of pull rollers 2 - Pull rollers diameter 180 mm - Number of support rollers 147 - Largest roller distance 200 mm The machine is equipped with: - Control cabinet with drive outlets for height adjustment on the inlet/outlet side of the straightening cassette as well as for the two main drives connected in parallel - Hydraulic unit for the hydr. Movements of the infeed table and the delivery of the infeed driver - Support rollers firmly installed at the top and bottom - Documentation, digital only! - Additional, unused straightening roll cassettes with 17 straightening rolls and intermediate rolls at the top and bottom. The machine was until lately integrated into a fully automatic punching line, therefore it is necessary to complete the control system. There is alr ...
New in: 1974
used
Working length: 3050mm, sheet thickness: 10mm. ... more information
New in: 2019
used
30.000 € Description: serial number: KOSPAR/2025/08/2017 working hours: power on time: approx. 5460 hrs. run time: approx. 3129 hrs. cutting time: approx. 1233 hrs. , max. component diameter: ,160 mm min. component diameter: ,50 mm max. component length: ,1000 mm min. component length: ,100 mm max. spindle working speed: ,1400 rpm min. spindle working speed: ,600 rpm , overall dimensions including with all conveyors: ,5500 x 5450 x 2400 mm , transport dimensions: machine: ,5100 x 1700 x 2400 mm feeder: ,2200 x 1400 x 1300 mm receiver: ,2200 x 1400 x 1300 mm chip conveyor: ,4950 x 1000 x 1900 mm , tools are not included in the offer except the standard set of 4 clamping jaws , please also have a look at the videos and the PDF document of this machine weight approx.: 6,700 kg, Approx. Onsite Dimension. (l x w x h) ...
New in: 1991
used
Max. stroke speed: 600-2000/min, feed: 10-80mm, with oil cooler. ... more information
New in: 1996
used
plate width: 1,524 mm, plate length: 2,540 mm, plate thickness: 0,5 - 3,5 mm, max. punching diameter: 33 mm, weight approx.: 21,000 kg, Approx. Onsite Dimension. (l x w x h): 21,000 x 7,000 x 2,500 mm ... more information
New in: 1997
used
Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t. ... more information
New in: 1994
used
Description: Roll bending machine Serial number MG-94497531 Number of rolls: 3 Working length: 2500 mm Maximum bending thickness: 15 mm Rollers diameter: 350 mm Rollers length: 2550 mm Vertical travel of the rollers: 250 mmnumber of rolls: 3, upper roll diameter: 350 mm, side roller dia.: 350 mm, weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,500 x 2,000 mm
New in: 1997
used
Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t. ... more information
New in: 2000
used
4.900 € Description: serial number: 041701 control: BOSCH Trumagraph , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
New in: 1998
used
Working width: 3050mm, max. cutting capacity: 9mm, length: 3500mm, width: 2500mm, height: 2000mm, weight: 10t. ... more information
New in: 2002
used
7.700 € Description: bending diameter range for bending strength modulus (RS=250N/mm2): ,1.3 m3 maximum pipe diameter: ,32 mm minimum pipe diameter: ,4 mm maximum pipe length for mandrelless bending: ,9999 mm minimum pipe length for bending with a mandrel: ,4450 mm , single dimensions machine: 5200 x 1000 x 1200 mm control cabinet: ,600 x 900 x1900 mm , set includes a safety mat, a SICK light curtain and tools but only those visible in separate photos (not mounted on the machine) offer does not include fences or other tools mounted on the machine , please also have a look at the PDF document of this machine tube length max.: 9,999 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 2,000 x 1,900 mm
used
Shaft diameter: 145mm, sheet dimensions: 650x1.5mm, without tools. ... more information
New in: 1992
used
1.950 € Description: working length: 2000 mm max. sheet thickness: 2 mm machine is in good technical condition, after previous agreement the possibility of testing Approx. Onsite Dimension. (l x w x h): 2,780 x 640 x 1,390 mm, weight approx.: 2,300 kg ... more information
New in: 1979
used
Pipe diameter: 219mm, nominal width: 3600mm, including preheating oven, Blasting System GIETART GW 1530-425, centrifuge, coating center, drying tunnel, chain conveyor and color filter, operational hours: ca. 8,000h. ... more information