sheet metal working used for sale

Inv. Num. : 6271 Type: Trumatic L4030 Producer: TRUMPF Generated: 2000 Parameters: Control system: Siemens Sinumerik 840 Laser ON: 89383 BEAM ON: 45361 Laser power: 4 kW Work table length: 4000 mm Work table width: 2000 mm Equipment: 2 x Head  ... more information

Inv. Num. : 5652 Type: MD6-RE60.1300 Producer: LC CATTANEO Created: 2014 Parameters: Maximum sheet metal plate width: 1300 mm Maximum sheet thickness (ordinary steel): 0.8-3 mm speed: 60 m/min Height adjustment from the ground: 990-1360 mm  ... more information

Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg

Inv. Num: 5422 Type: ML3015eX PLUS Producer: Mitsubishi Generated: 2017 Parameters: Control system: MITSUBISHI M 700 Engine hours: 21480 h Spindle hours: 1480 h Laser power: 4.5 kW Maximum table load (even): 930 kg Feed length X-axis: 3100 mm Feed length Y-axis: 1565 mm Feed length Z-axis: 150 mm Machine length: 10210 mm Machine width: 3130 mm Machine Weight: 10700 kg

Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg  ... more information

Control system: TRUMPF Power on: 35071 h Cutting time: 14638 h Laser power: 3 kW Table dimensions: 3000 x 1500 mm Travel distances: X: 3000 mm Y: 1500 mm Z: 115 mm Max. Thickness of material Mild steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Machine dimensions: 9300 x 4600 x 2200 mm Machine weight: 12000 kg

Produced: 2004 Parameters: Table: 2x3m Max head count: 4 Gauge: 2500 mm Cutting width -1 burner: 2100 mm Cutting width -2 burners: 1970 mm Cutting width -3 burners: 1840 mm Cutting width -4 burners: 1710 mm min. Parallel cut: 90 mm Cutting speed: 50-6000 mm/min. Cuttous (standard): do 200 mm Machine width: 3150 mm Machine length: 1320 mm Machine height: 1700 mm Cutting table height: 600 mm Connection voltage: 230V/50Hz

Maximum cutting length: 3080 mm Maximum sheet thickness during cutting: 6 mm Maximum cutting angle: 2 st Total power requirement: 11 kW Rear stop: 1000 mm Machine height: 1950 mm Machine length: 4100 mm Machine width: 2050/3650 mm Machine weight: 7980 t  ... more information

STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...

BYSTRONIC HAMMERLE 250 3P CNC hydraulic press brake constructed in 2015 in Germany, is the perfect choice for intensive series and unit production. The perfectly optimised machine with its sturdy design, high press force of 250 tonnes and a slider with a long stroke enables the machining of large, non-standard parts. During sheet metal cutting, the machine uses an advanced Fast Bend + safety system. The system, consisting of wide-angle cameras and a laser sensor, acts as an intelligent braking assistant that ensures faster approach, bending and return without compromising operator safety. The price of the offer also includes extensive tooling, a foot switch controller and intelligent CNC control. The BYSTRONIC HAMMERLE 250/3100 3P CNC press brake weighs 20500 kg. Technical specifications of the BYSTRONIC HAMMERLE 250 3P press brake - CNC control: BYSTRONIC ByVision - maximum press f ...

EUROMETAL HGS 6×3200 NC hydraulic guillotine shears built in 2012 are used for precision sheet metal cutting with a maximum thickness of 6 mm. The machining process is performed by precision cutting knives with an option to adjust the gap between the blades while the upper cutting knife is mounted on a swing beam. This solution allows the machining of both steel sheets and workpieces made of non-ferrous metals. The simple design with efficient hydraulic system additionally ensures trouble-free operation throughout the entire lifetime, while at the same time maintaining the highest cutting quality. The EUROMET HGS 6×3200 NC guillotine shears weigh approximately 6600 kg. Technical specifications of the EUROMETAL HGS 6×3200 NC guillotine shears - maximum workpiece length: 3200 mm - maximum workpiece thickness: 6 mm - cutting angle: 1°30′ - stroke rate: 14/min - cutting blade l ...

DENER DMP 3100/200 SMART CNC press brake was built in 2007 in Turkey. The machine, distinguished by its extremely stable construction, high press force of 200 tonnes and excellent precision, is the ideal choice for even the most intensive machining in any production facility. To further improve the machining process, all parameters are programmed in the intuitive CYBELEC DNC 60 CNC controller with many useful functions. The total weight of the machine is 10500 kg. Technical data of the DENER DMP 3100/200 SMART press brake - CNC control: CYBELEC DNC 60 - maximum press force: 200 t - maximum workpiece length: 3100 mm - WILA hydraulic top and bottom tool clamping - motor power: 15 kW - maximum pressure: 290 bar - oil tank capacity: 150 l - weight of machine: 10500 kg

HESSE DURMA HAP 30120 CNC press brake was built in 2005 in Austria. This specially designed and perfectly optimised machine ensures the highest precision and accuracy in bending, even during the most intensive machining. All of this is due to its extremely sturdy construction, high press force of 120 tonnes and the intuitive ENC 100 control panel, in which all the machining parameters are programmed. During its use, the DURMA HAP 30120 press has undergone regular maintenance. The total weight of the machine is 7260 kg. Technical specifications of the HESSE DURMA HAP 30120 press brake - control panel: ENC 100 - maximum press force: 120 t - maximum workpiece length: 3050 mm - slider stroke: 155 mm - upper tool weight: 40 kg - bottom tool weight: 55 kg - foot switch - side guards - oil tank capacity: 150 l - dimensions (L x W x H): 4150 x 2150 x 2600 mm - weight of machine: 72 ...

BYSTRONIC ByStar L 4025-65 6 kW laser cutting machine built in 2018 in Switzerland is designed for precision cutting of among others carbon steel, stainless steel and aluminium. The machine uses a stable 6 kW laser beam with a thickness of just a few μm to achieve excellent processing results in the form of extremely even and smooth edges along the entire length of the workpiece. The machining process takes place on a rigid work table with a length of 6500 mm and a width of 2500 mm, which ensures high stability even during the most demanding challenges. During its use, the BYSTRONIC ByStar L 4025 laser cutting machine has been continuously serviced and has original parts. The total weight of the machine is 28900 kg. Technical data of the BYSTRONIC ByStar L 4025-65 laser - laser beam power: 6 kW - work table dimensions (L x W): 6500 x 2500 mm - workpiece thickness range (plain stee ...

ULTRAPRAS WPK 1250 hydraulic press brake which was built in 2021 in Poland, provides excellent precision sheet metal bending under almost all conditions. The extremely easy-to-operate machine with its compact design has an opening top beam, which also enables machining of closed-profile workpieces. In the machining process, the UltraPras WPK-1250 workshop press brake uses a powerful hydraulic-based drive and high-quality tools in the form of bending prisms and punches. The tools can be changed at any time to adapt the operating mode to the type of machining. When the length of the bent sheet is reduced, its maximum thickness increases. All these features make the WPK1250 press brake ideal for locksmiths and mechanical workshops. The total weight of the machine is 1400 kg. Technical parameters of the ULTRAPRAS WPK 1250 press brake - maximum press force: 32 t - maximum workpiece lengt ...

UNI-KAT SPARK 2 oxygen plasma cutting machine built in 2020 in Poland, is used in the thermal cutting of steel sheets. This versatile machine with extensive machining capabilities is ideal for even the most intensive applications in any production facility. Thanks to its extremely stable design with a large work area, the UNI-KAT SPARK2 plasma-gas cutting machine offers much greater cutting precision, compared to single-support cutting machines. In addition, in order to simplify the performed work, the drawings of the cut parts can be produced in most vector graphics programs. The offer also includes extensive additional equipment, including e.g. a HARRIS 198-2TF torch powered by technical propane-butane and technical oxygen, advanced CAD/CAM software and an air compressor. The machine has so far worked for current production (one shift) and has been regularly serviced. The UNI-KAT pl ...

TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting and welding. For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to achieve with other standard mach ...

DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...

AJAN SHP 130 plasma cutting machine was built in 2015 in Turkey. This highly efficient and precise machine is used in the thermal cutting of stainless steel, structural steel and aluminium sheets. In the machining process, the AJAN SHP 130 1500 X 3000 plasma cutting machine uses a plasma torch, which is powered by a reliable 130 A plasma source. The lightweight design made of a stiffened profile additionally ensures that cutting is performed with the utmost stability, even during the most intensive machining. Any contamination generated during machining is eliminated on an ongoing basis by the extraction table, increasing operator comfort and safety. To this date, the machine has run for a small amount of time and is in perfect condition. The work table grate was replaced with a new one during a recent upgrade. The offer also includes optional equipment, which includes a torch holder  ...

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in Poland in 2007 is a combination of reliability, high efficiency and excellent precision. This versatile machine with a wide range of machining capabilities features a high-quality steel design with a length of 6000 mm and a width of 2500 mm, which maintains excellent stability even during the most intensive machining. The use of such a large work space allows the convenient loading and unloading of larger workpieces made of e.g. black steel and stainless steel. The offered ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR260 plasma source with power of 260 A, a ECKERT ECS CNC controller and a head for drilling. Technical parameters of the ECKERT JANTAR 2 plasma-gas cutting machine - CNC control: ECKERT ECS - work table dimensions (L x W): 6000 x 2500 mm - drilling head - plasma torch (1 pc.) -  ...