sheet metal working used for sale

Motorized swivel bending machine Manufacturer Fasti Type 2095-20-2 Sheet power 2040 x 2 mm at 400 N/mm2 Digital display of the bending angle Foot pedal Notaus Power connection 400V  ... more information

Pneumatically driven punching, Horizontally arranged. Pedicure Manufacturer: Meuleman Engineering BV Vosseboerweg 7 7683 SH Den Ham (Ov) Punching force 200kg Special price  ... more information

Muhr & Bender KBL 65-30 Optima B profile punching machine Type KBL 65-30 Year of construction 1975 Central lubrication Electrical triggering of the movement via foot pedal 5 tool stations Stop for long material Punch Punch 30mm in 17mm 24mm in 21mm Quick-change device for stamps Profile scissors 1. Z-profile 90° 140mm 2. Angle iron 90° 130x12mm 3. Square aisles 50mm 4. Round iron 55mm 6. T-iron 180mm 7. U-iron 90° 180mm 8. T-iron 90° 100mm Bar steel shears for material 45kp mm² strength 1. Flat iron up to max 60x28mm or 120x18mm 2. Angle iron 80x10mm 3. Square aisles 40mm 4. Round iron 45mm 6. T-iron 80x10mm 7. U-iron 100mm 8. T-iron 100mm Plate shears 1. with knife 13° = 13mm 2. with knife 2.5°= 140x9mm / 220x8mm 3. with knife 5° = 140x13mm / 220x12mm 3 phase current.- Freque ...

Hydraulic swivel bending machine Year of construction 1978 Power 2.000mm x 2,5mm Engine 2,2KW Weight approx. 2,8to Technically good condition Condition according to photos. Machine ready for demonstration under power.  ... more information

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price  ... more information

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!  ... more information

Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!  ... more information

CNC Plate Bending Roll Year 2021 Approx. 100 hours Number of Rolls 4 Rolls length 10’ 2” Top Roll diameter 18.2” – less deflecting thanks to Planetary Guide Technology Bottom Roll Diameter 16.6” Side Rolls diameter 14.2” Smallest possible diameter 21” thank to planetary guide technology Rolling Speed 20 ft/min (imperial) Installed power HP 72 (Energy Saving Technology) Power Supply V., 60 Hz Rolls material High resistance, heat treated, tested & certified Carbon Steel Rolls Hardening Induction surface up to 48 – 62 HR Rockwell C, according to Customer’s application and rolls materials Rolls Periph, Speed compensation Automatic (no torque loss, no operator setting needed) Rolls Crowning Top and lower (clamping) rolls are standard crowned to compensate Rolls deflection Rolls guiding Friction-free, mill-scale-proof, lubrication-less planetary guides R ...

Haeusler 4 Roll Double Initial Pinch Hyd Plate Roll Model: VRM-HY Number of Driven Rolls: 4 Length of Rolls: 122.04" / 3100mm Capacity Pre Bend: 3.5" / 90mm Capacity: Rolling: 3.9" / 100mm Roll Diameter (Top): 31.1" / 790mm Roll Diameter (Bottom): 31.1" / 790mm Roll Diameter (Side): 23.6" / 600mm Roll Diameter (Spare Top): 25.5" / 650mm Main Motor Drive: 215 HP / 160kW Equipped With Double Initial Pinch Hydraulic Drop End Hydraulic Tilt of Top Roll Hydraulic Positioning of Side Rolls Top/Bottom Driven Via Cardon Shaft Drives to Gear Box Spare 25" / 650mm Top Roll For Smaller Diameter Rolling Set up for Hot Rolling

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

We hereby sell a good AMADA laser cutting machine which is in very good condition. The laser machine is sold completely incl. software for programming, machine documents, water chiller, Extraction system and transformer. Specifications: Year of construction: 1998 Switch-on hours: 22.000h Laser Machine LC-2415 C2000 B / Model: LC2415 A2 Model: FANUC C2000 B Nominal laser power: 2000 WATT Max laser power: 2000 WATTS Laser wavelength: 10.6 μm Pulse width: 100μs-cw Steel diameter: >27mm Laser gas consumption: approx. 10l/h Laser protection class 4 Weight: 6.500 kg

STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...

DURMA MS 2004 guillotine shears were built in 2008 in Turkey. The machine, characterised by the application of many facilities and modern solutions, guarantees precise and efficient machining of, among others, stainless steel, aluminium, copper and plain steel. A sheet metal with a maximum thickness of 4 mm is fed through ball transfers built into the work table, whose design protects the surface of sensitive materials from scratches and nicks. All machining process parameters are programmed on the intuitive DURMA ENC-100M control panel with a clear LCD display and memory for 50 programmes. During the cutting process, the rigid design of the machine ensures that sheet deformations are within tolerance, making both the workpiece and the cut-off ready for further machining. The DURMA MS-2004 mechanical guillotine shears are offered with direct drive, high-quality cutting knives with adj ...

ALIKO SP4200-220 220 t CNC hydraulic press brake was built in Finland in 2006. Specially designed and perfectly optimised for even the most intensive bending, the machine has 220 tonnes of press force and a slider with a stroke of 900 mm, enabling the efficient production of large, non-standard parts. All this, combined with a stable design and low energy consumption, makes the ALIKO CNC 220-4200 CNC press the best choice among other press brakes available on the market. The offer additionally includes adapters and carriages for removing the adapters. The total weight of the machine is 21500 kg. Technical parameters of the ALIKO SP4200-220 press brake - CNC controller: CYBELEC ModEva 10S (support of 18 different languages including Polish) - press force: 220 t (2200 kN) - maximum workpiece length: 4200 mm - slider stroke: 900 mm - maximum tool weight: 1500 kg - response time: 10 ...

DENER DMP 3100/200 SMART CNC press brake was built in 2007 in Turkey. The machine, distinguished by its extremely stable construction, high press force of 200 tonnes and excellent precision, is the ideal choice for even the most intensive machining in any production facility. To further improve the machining process, all parameters are programmed in the intuitive CYBELEC DNC 60 CNC controller with many useful functions. The total weight of the machine is 10500 kg. Technical data of the DENER DMP 3100/200 SMART press brake - CNC control: CYBELEC DNC 60 - maximum press force: 200 t - maximum workpiece length: 3100 mm - WILA hydraulic top and bottom tool clamping - motor power: 15 kW - maximum pressure: 290 bar - oil tank capacity: 150 l - weight of machine: 10500 kg

BYSTRONIC ByStar L 4025-65 6 kW laser cutting machine built in 2018 in Switzerland is designed for precision cutting of among others carbon steel, stainless steel and aluminium. The machine uses a stable 6 kW laser beam with a thickness of just a few μm to achieve excellent processing results in the form of extremely even and smooth edges along the entire length of the workpiece. The machining process takes place on a rigid work table with a length of 6500 mm and a width of 2500 mm, which ensures high stability even during the most demanding challenges. During its use, the BYSTRONIC ByStar L 4025 laser cutting machine has been continuously serviced and has original parts. The total weight of the machine is 28900 kg. Technical data of the BYSTRONIC ByStar L 4025-65 laser - laser beam power: 6 kW - work table dimensions (L x W): 6500 x 2500 mm - workpiece thickness range (plain stee ...

TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting, welding and laser metal deposition (LMD). For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to ac ...

BYSTRONIC BySprint 3015 laser cutting machine was built in 2006 in Switzerland. Designed for even the most intensive machining, the machine uses an extremely stable 3 kW laser beam, whose excellent parameters ensure the highest energy efficiency while maintaining low operating costs. Additionally, in order to meet any production challenges, the process of loading and unloading the workpieces can be performed during the cutting process, which significantly increases production efficiency and reduces machine downtime to a minimum. The offered BySprint 3015 laser cutting machine has been regularly serviced and its total weight is approximately 12000 kg. Technical specifications of the BYSTRONIC BySprint 3015 laser - laser beam power: 3 kW - laser beam power adjustment range: 150 – 3000 W - work area (L x W): 3048 x 1524 mm - maximum sheet metal dimensions (L x W): 3000 x 1500 mm - ...

DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...

DURMA E 2040 CNC press brake which was built in 2009 in Turkey, offers the highest productivity and precision in workpiece bending, while maintaining low operating costs. The machine performs excellently even during the most intensive processing thanks to its extremely stable design, high press force of 40 tonnes and intuitive CNC control DURMA DU 6000. The work area is protected by the DFS LASER photoelectric safety device, which automatically switches off the machine’s power supply in the event of an interruption of the emitted laser beam. The price also includes tooling shown in the photos, worth 15 500 PLN. The DURMA E-2040 press brake weighs 4060 kg. Technical data of the DURMA E 2040 CNC press brake - CNC control: DURMA DU 6000 - maximum press force: 40 t - maximum workpiece length: 2050 mm - slider stroke: 160 mm - reach: 350 mm - distance between columns: 1650 mm - ap ...