subcategories
(3rd category level)
Manufacturer:
(Category: 107)
There are two identical bending machines available, working width: 2000mm. ... more information
Voltage: 220/ 380V, nominal current: 8/ 5A. ... more information
Pressing force: 71kN, projection: 610mm, max. stroke length: 220mm, output: 1400E/h, weight: approx. 1300kg. ... more information
Press: Press force: 220kN, max. stroke: punching: 1350/min, marking: 3000/min, working range X/Y (punching): 3050mm/1550mm, max. sheet thickness: 8mm. Laser: Power: 6000W, max. sheet thickness (mild steel): 6mm, max. sheet thickness(stainless steel): 6mm, max. sheet thickness(aluminum): 5mm. Tools and automation: MultiTool change time: 0.3s, number of tools/clamps: 21/4, max. workpiece weight: 280kg. Dimensions X/Y/Z: approx. 7600mm/8200mm/2100mm, weight: approx. 11050kg, operating hours: 28128h. Documentation available.
There are 3x punch rivet feeders and 2x C-pliers Böllhoff available. Self-pierce rivet feeder: 2x ABF, 1x LG, years of construction: 1998-2003, rivets: 3x4mm and 3x5mm. C-tongs: Year of manufacture: 1998, max. rivet setting pressure: 250bar, max. rivet setting force: 50kN. Documentation available. On-site inspection is possible.
CONTROLS PLC SIEMENS FEEDSTOCK STEEL STRIP sheet width max.: 450 mm sheet width min.: 90 mm sheet thickness max.: 13 mm sheet thickness min.: 2 mm exterior coil diameter max.: 1900 mm exterior coil diameter min.: 1100 mm internal coil diameter max.: 760 mm internal coil diameter min.: 610 mmPRODUCT (PROFILE, TUBE) external diameter min.: 30 mm external diameter max.: 140 mm wall thickness min.: 2 mm wall thickness max.: 12 mm length min.: 4000 mm lenght max.: 10000 mmLINE CHARACTERISTICS Forming Process: rollforming welding process: HF inductive sawing process: travelling speed max.: 65 m/min feedstock transport direction: left to right Line consists of:- Strip prepara ...
FEEDSTOCK TUBE external diameter min.: 10 mm external diameter max.: 90 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- Ultrasonic system incl. digitization- test process Krautkrämer and measuring devices- Ultrasonic measuring device- Length differences >500 mm Sorting out Krautkrämer- Förster Defectomat continuous spool- Replacement mix-up test Krautkrämer
CHARACTERISTICS STRETCH-STRAIGHTENING force: 500 kN Working length: 13000 mm center height: 250 mm stroke: 1000 mmmax. stretching length: 13'000 mmmax. stretching length: 3'000 mmjaw width: 160 mmjaw opening: 0-100 mmTorque: 600 NmRotation angle: +/- 90 degreesRotation speed standard: 1 rpmRotation speed fine: 0.25 rpmStretching speed: 10.8 mm/secRapid speed in working direction: 106 mm/secRapid speed in return for releasing: 93 mm/secToothed rack pitch: 250 mmJaw confirmation: 5-6 kgf/cm2 (pneumatic)Mandrel confirmation: 5-6 kgf/cm2 (pneumatic)
CONTROLS PLC SIEMENS FEEDSTOCK STEEL STRIP sheet width max.: 221 mm sheet width min.: 58 mm sheet thickness max.: 8 mm sheet thickness min.: 1 mm exterior coil diameter max.: 2100 mm exterior coil diameter min.: 1600 mm internal coil diameter max.: 610 mm internal coil diameter min.: 508 mm coil weight max.: 6000 kgPRODUCT (PROFILE, TUBE) external diameter min.: 22 mm external diameter max.: 65 mm length min.: 4500 mm lenght max.: 10000 mmLINE CHARACTERISTICS Forming Process: rollforming welding process: HF inductive sawing process: travelling speed max.: 100 m/min feedstock transport direction: left to right Line consists of:- Band Preparation VAI-SEUTHE BV 200-8 (YoM 2001, Siem ...
FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 110 mm length min.: 400 mm lenght max.: 1700 mmPRESS FORCES total force (nominal): 40 toSystem consists of:+ WICK handling system, YoM 2012+ ABB IRB 6650S-90/3.9 handling robot, YoM 2012+ MAE M-AH 6 automatic pipe straightening machine, YoM 2012
FEEDSTOCK TUBE external diameter min.: 60 mm external diameter max.: 180 mm length min.: 3000 mm lenght max.: 10000 mmPRODUCT (PROFILE, TUBE) external diameter min.: 50 mm external diameter max.: 168 mm length min.: 4000 mm lenght max.: 12500 mmCHARACTERISTICS DRAWING MACHINE force: 2000 kN drawing length max.: 12500 mm number of parallel trains / strands max.: 1 speed max.: 40 m/min etching device: yes Function: Automatic (towing carriage moving forwards and backwards, front bench horizontal)Products: Round tubes, precision tubes, cardan shaftsmax. drawing rod / pointed end diameter: 120 mmmin. drawing rod / pointed end diameter: 33 mmmax. drawing rod / pointed end length: 240 mmmin. drawing rod / pointed end length: 200 mmDrawing dia ...
FEEDSTOCK TUBE external diameter min.: 38 mm external diameter max.: 130 mm length min.: 3000 mm lenght max.: 10000 mmPRODUCT (PROFILE, TUBE) length min.: 4000 mm lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE force: 550 kN drawing length max.: 13500 mm number of parallel trains / strands max.: 3 speed max.: 100 m/min pipe brake: yes Function: Automatic (pull chain runs forwards and backwards, front bench swivels vertically)Products: Round tubes, HZ-PZ precision tubes, cardan shafts, profilesModernized: 2016 new motor cooling system1999 new direct current drives2005 new pulling belt brake2015 new drive technologymax. drawing rod / pointed end diameter: 110 mmmin. drawing rod / pointed end diameter: 22 mmmax. drawing rod / pointed end length: 230 mmmin ...
FEEDSTOCK TUBE external diameter min.: 22 mm external diameter max.: 140 mm wall thickness min.: 1 mm wall thickness max.: 14 mm length min.: 4500 mm lenght max.: 12500 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- LMD test spool nominal size 120- Nukem test system installation cabinet- Steel checker plates (safety protection)- Defectomat pass-through spool- Ultrasonic and wall thickness testing system NUKEM- Replacement demagnetization Nukem- Replacement inspection electronics
CONTROLS PLC SIEMENS S5 115 U FEEDSTOCK TUBE external diameter min.: 18 mm external diameter max.: 127 mm length min.: 3000 mm lenght max.: 12000 mmModernized:1996 pipe length increased from 8.5 to 12 meters2000 cross chain added on the rightmin. base length of hexagonal bundles: 150 mmmax. base length of hexagonal bundles: 350 mmmax. bundle weight: 4'000 kgmax. tube weight: 30 kg/mincl. scale BUSCH EMWincl. data recording station BUSCH 875
FEEDSTOCK TUBE external diameter min.: 25 mm external diameter max.: 55 mm length min.: 3500 mm lenght max.: 10000 mmPRODUCT (PROFILE, TUBE) length min.: 5000 mm lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE force: 320 kN drawing length max.: 13500 mm number of parallel trains / strands max.: 3 speed max.: 100 m/minFunction: Automatic (manual threading, pull chain runs forwards and backwards, front bench can be swiveled vertically)Products: Round tubes (mostly shock absorbers), semi-finished or finished productsModernized: 1999 new pulling belt and brake2022 pulling chain partially renewedmax. drawing rod / pointed end diameter: 40 mmmin. drawing rod / pointed end diameter: 14 mmmax. drawing rod / pointed end length: 170 mmmin. drawing rod / pointed end length: 150 mmnumb ...
CONTROLS PLC SIEMENS S7-1500 FEEDSTOCK TUBE external diameter min.: 27.5 mm external diameter max.: 160 mm wall thickness min.: 1 mm wall thickness max.: 15 mm length min.: 3500 mm lenght max.: 13000 mmTUBE LEVELLING UNIT number of leveller rolls: 6 number of intermediate rolls: 3 main drive power: 110 kW feedstock transport direction: left to right System consisting of:+ various existing and supplemented pipe transport systems+ Tube Straightener Montbard DMS 168, YoM 1989+ Chipless Cutting System Bültmann STA 120 H, YoM 2005+ Saw Ohler KA-630-7877, YoM 1988+ Sample Saw Ohler K-400Modernized:2005 new Bültmann chipless cutting system2018 overhaul of complete electrical system2018 new safty protection systemInlet Feed Drive (top and bottom roller): 2x 7 KW ...
CONTROLS PLC SIEMENS S7-400 FEEDSTOCK TUBE external diameter min.: 22 mm external diameter max.: 90 mm length min.: 6000 mm lenght max.: 10000 mmPRODUCT (PROFILE, TUBE) external diameter min.: 17.5 mm external diameter max.: 80 mm length min.: 7000 mm lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE force: 1000 kN drawing length max.: 13500 mm number of parallel trains / strands max.: 3 speed max.: 67.5 m/min main drive power: 800 kWModernized:2011 new drawbar mouth2019 new collar bearing, draw bench chain and gearbox2021 new front benchPulling capacity+ 1-fold: 500kN, no short-term overload+ 2-fold: 1000kN, no short-term overload+ 3-fold: 1000kN, short-term overload 1300kN+ RohrbremseAttachments:+ tube brakemax. drawing rod / poin ...
CONTROLS PLC OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 4 mm coil weight max.: 10.5 to feedstock transport direction: right to left COIL CHAIR coil weight max.: 10.5 to stroke: 750 mmDECOILER design: single reel sheet width max.: 500 mm sheet width (min): 150 mm coil weight max.: 10.5 to max. diameter of coil: 2020 mm mandrel expansion range from: 470 mm mandrel expansion range up to: 530 mm feed velocity max.: 20 m/minCROP SHEAR sheet thickness max.: 4 mm working width max.: 530 mm stroke rate (max.): 20 /minLEVELLER UNIT sheet width max.: 500 mm sheet width (min): 150 mm sheet thickness max.: 4 mm sheet thic ...
CONTROLS PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 4 mm coil weight max.: 10.5 to feedstock transport direction: right to left COIL CHAIR coil weight max.: 10.5 to stroke: 750 mmDECOILER design: single reel sheet width max.: 500 mm sheet width (min): 150 mm coil weight max.: 10.5 to max. diameter of coil: 2020 mm mandrel expansion range from: 470 mm mandrel expansion range up to: 530 mm feed velocity max.: 20 m/minLEVELLER UNIT sheet width max.: 500 mm sheet width (min): 150 mm sheet thickness max.: 4 mm sheet thickness min.: 2 mm number of leveller rolls: 9 diameter of leveller rolls: 56 mm &n ...
TECHNICAL SPECIFICATION Max. diameter of tube: 65 mm Max. wall thickness: 2 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 5400 mm space requirements -front/back-: 1550 mm total height: 1500 mm total weight approx.: 6500 kg+ 8-axis CNC pipe and wire bender+ CNC controlled feeder with pneumatic grippers+ separate servo drives for A-axis: rotation unit 35 mm B-axis: bending heand C-axis: feeder D-axis: &nb sp;mandrel device L-axis: slide rail P-axis: chucking device V-axis: counter holder Y-axis: bending Z-axis: & nbsp;bending head up/downFeedi ...