The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

subcategories
(3rd category level)

more 3068

 

Manufacturer:
(Category: 107)

A+B 1
ACD 1
ACF 1
AEF 1
AJAN 25
Alu 2
AMADA 139
AMC 1
AMG 1
AMT 2
API 1
aps 3
ASH 1
ATS 4
AWM 1
BBM 1
BL 1
BLM 5
BMS 1
BPR 2
BRG 1
BWM 3
CMC 1
CMS 1
CR 2
CRM 1
CSM 1
DAVI 20
DMF 3
DMG 3
DMS 1
DURMA 150
EBU 2
EDEL 14
EHT 25
EMS 1
ESAB 10
ETA 1
EVG 1
EZM 1
FIM 2
FLOW 10
FTX 1
GEKA 63
sheet metal working / Cutting-To-Length Lines
Entry date: 15.06.2024 add to watchlist
Machine: ARKU RM 50X/9 ECOPLAN Cut to Length Line
item-No.: 164297206
New in: 2005
used

CONTROLS  PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 4 mm  coil weight max.: 10.5 to  feedstock transport direction: right to left COIL CHAIR  coil weight max.: 10.5 to  stroke: 750 mmDECOILER  design: single reel   sheet width max.: 500 mm  sheet width (min): 150 mm  coil weight max.: 10.5 to  max. diameter of coil: 2020 mm  mandrel expansion range from: 470 mm  mandrel expansion range up to: 530 mm  feed velocity max.: 20 m/minLEVELLER UNIT  sheet width max.: 500 mm  sheet width (min): 150 mm  sheet thickness max.: 4 mm  sheet thickness min.: 2 mm  number of leveller rolls: 9   diameter of leveller rolls: 56 mm &n ...

sheet metal working / Tape Straightening Machines
Entry date: 15.06.2024 add to watchlist
Machine: ARKU RM 50X/9 ECOPLAN Coil Reel & Straightener
item-No.: 164297207
New in: 2005
used

CONTROLS  PLC OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 4 mm  coil weight max.: 10.5 to  feedstock transport direction: right to left COIL CHAIR  coil weight max.: 10.5 to  stroke: 750 mmDECOILER  design: single reel   sheet width max.: 500 mm  sheet width (min): 150 mm  coil weight max.: 10.5 to  max. diameter of coil: 2020 mm  mandrel expansion range from: 470 mm  mandrel expansion range up to: 530 mm  feed velocity max.: 20 m/minCROP SHEAR  sheet thickness max.: 4 mm  working width max.: 530 mm  stroke rate (max.): 20 /minLEVELLER UNIT  sheet width max.: 500 mm  sheet width (min): 150 mm  sheet thickness max.: 4 mm  sheet thic ...

sheet metal working / Pipe Manufacturing Machines
Entry date: 15.06.2024 add to watchlist
Machine: REIKA  Tube Inspection Machine
item-No.: 164297208
New in: 1996
used

FEEDSTOCK TUBE  external diameter min.: 10 mm  external diameter max.: 90 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- Ultrasonic system incl. digitization- test process Krautkrämer and measuring devices- Ultrasonic measuring device- Length differences >500 mm Sorting out Krautkrämer- Förster Defectomat continuous spool- Replacement mix-up test Krautkrämer

sheet metal working / Pipe Drawing Machines
Entry date: 15.06.2024 add to watchlist
Machine: BÃœLTMANN HRZ 2000/1-14 Tube Drawing Machine
item-No.: 164297209
New in: 1989
used

FEEDSTOCK TUBE  external diameter min.: 60 mm  external diameter max.: 180 mm  length min.: 3000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  external diameter min.: 50 mm  external diameter max.: 168 mm  length min.: 4000 mm  lenght max.: 12500 mmCHARACTERISTICS DRAWING MACHINE  force: 2000 kN  drawing length max.: 12500 mm  number of parallel trains / strands max.: 1   speed max.: 40 m/min  etching device: yes Function: Automatic (towing carriage moving forwards and backwards, front bench horizontal)Products: Round tubes, precision tubes, cardan shaftsmax. drawing rod / pointed end diameter: 120 mmmin. drawing rod / pointed end diameter:  33 mmmax. drawing rod / pointed end length: 240 mmmin. drawing rod / pointed end length: 200 mmDrawing dia ...

sheet metal working / Pipe Drawing Machines
Entry date: 15.06.2024 add to watchlist
Machine: MONTBARD  Tube Drawing Machine
item-No.: 164297210
New in: 1978
used

FEEDSTOCK TUBE  external diameter min.: 38 mm  external diameter max.: 130 mm  length min.: 3000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  length min.: 4000 mm  lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE  force: 550 kN  drawing length max.: 13500 mm  number of parallel trains / strands max.: 3   speed max.: 100 m/min  pipe brake: yes Function: Automatic (pull chain runs forwards and backwards, front bench swivels vertically)Products: Round tubes, HZ-PZ precision tubes, cardan shafts, profilesModernized: 2016 new motor cooling system1999 new direct current drives2005 new pulling belt brake2015 new drive technologymax. drawing rod / pointed end diameter: 110 mmmin. drawing rod / pointed end diameter:  22 mmmax. drawing rod / pointed end length: 230 mmmin ...

sheet metal working / Straighteners
Entry date: 15.06.2024 add to watchlist
Machine: MONTBARD DMS 168 Tube Straightener
item-No.: 164297211
New in: 1989
used

CONTROLS  PLC SIEMENS S7-1500 FEEDSTOCK TUBE  external diameter min.: 27.5 mm  external diameter max.: 160 mm  wall thickness min.: 1 mm  wall thickness max.: 15 mm  length min.: 3500 mm  lenght max.: 13000 mmTUBE LEVELLING UNIT  number of leveller rolls: 6   number of intermediate rolls: 3   main drive power: 110 kW  feedstock transport direction: left to right System consisting of:+ various existing and supplemented pipe transport systems+ Tube Straightener Montbard DMS 168, YoM 1989+ Chipless Cutting System Bültmann STA 120 H, YoM 2005+ Saw Ohler KA-630-7877, YoM 1988+ Sample Saw Ohler K-400Modernized:2005 new Bültmann chipless cutting system2018 overhaul of complete electrical system2018 new safty protection systemInlet Feed Drive (top and bottom roller): 2x 7 KW  ...

sheet metal working / Pipe Drawing Machines
Entry date: 15.06.2024 add to watchlist
Machine: MONTBARD  Tube Drawing Machine
item-No.: 164297212
New in: 1984
used

FEEDSTOCK TUBE  external diameter min.: 25 mm  external diameter max.: 55 mm  length min.: 3500 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  length min.: 5000 mm  lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE  force: 320 kN  drawing length max.: 13500 mm  number of parallel trains / strands max.: 3   speed max.: 100 m/minFunction: Automatic (manual threading, pull chain runs forwards and backwards, front bench can be swiveled vertically)Products: Round tubes (mostly shock absorbers), semi-finished or finished productsModernized: 1999 new pulling belt and brake2022 pulling chain partially renewedmax. drawing rod / pointed end diameter: 40 mmmin. drawing rod / pointed end diameter: 14 mmmax. drawing rod / pointed end length: 170 mmmin. drawing rod / pointed end length: 150 mmnumb ...

sheet metal working / Pipe Manufacturing Machines
Entry date: 15.06.2024 add to watchlist
Machine: BECKER + PRÃœNTE  Tube Inspection Machine
item-No.: 164297213
New in: 1990
used

FEEDSTOCK TUBE  external diameter min.: 22 mm  external diameter max.: 140 mm  wall thickness min.: 1 mm  wall thickness max.: 14 mm  length min.: 4500 mm  lenght max.: 12500 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- LMD test spool nominal size 120- Nukem test system installation cabinet- Steel checker plates (safety protection)- Defectomat pass-through spool- Ultrasonic and wall thickness testing system NUKEM- Replacement demagnetization Nukem- Replacement inspection electronics

sheet metal working / Pipe Manufacturing Machines
Entry date: 15.06.2024 add to watchlist
Machine: MAIR RESEARCH PACK PIPE HEX 200/D 4SL Tube Bundling Line
item-No.: 164297214
New in: 1992
used

CONTROLS  PLC SIEMENS S5 115 U FEEDSTOCK TUBE  external diameter min.: 18 mm  external diameter max.: 127 mm  length min.: 3000 mm  lenght max.: 12000 mmModernized:1996 pipe length increased from 8.5 to 12 meters2000 cross chain added on the rightmin. base length of hexagonal bundles: 150 mmmax. base length of hexagonal bundles: 350 mmmax. bundle weight: 4'000 kgmax. tube weight: 30 kg/mincl. scale BUSCH EMWincl. data recording station BUSCH 875

sheet metal working / Pipe Drawing Machines
Entry date: 15.06.2024 add to watchlist
Machine: ASMAG  Tube Drawing Machine
item-No.: 164297215
New in: 1999
used

CONTROLS  PLC SIEMENS S7-400 FEEDSTOCK TUBE  external diameter min.: 22 mm  external diameter max.: 90 mm  length min.: 6000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  external diameter min.: 17.5 mm  external diameter max.: 80 mm  length min.: 7000 mm  lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE  force: 1000 kN  drawing length max.: 13500 mm  number of parallel trains / strands max.: 3   speed max.: 67.5 m/min  main drive power: 800 kWModernized:2011 new drawbar mouth2019 new collar bearing, draw bench chain and gearbox2021 new front benchPulling capacity+ 1-fold: 500kN, no short-term overload+ 2-fold: 1000kN, no short-term overload+ 3-fold: 1000kN, short-term overload 1300kN+ RohrbremseAttachments:+ tube brakemax. drawing rod / poin ...

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: ERMAKSAN HGS-A 3006 Plate Shear - Hydraulic
item-No.: 164296454
new

sheet width:3100 mmplate thickness:6 mmtable length:3400 mmtable width:490 mmtable height:800 mmstroke:18 pro Min.quantity of oil:150 lNumbers of downholders:14 cutting angle:1,2 °total power requirement:11 kWweight of the machine ca.:5,5 tmot.digital controlled backgauge, workspace:1000 mm:1000 mmfront support arms with T-slot and flip cams:1000 mm

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: ARKU RM 3060.2 Roller leveller
item-No.: 164296710
New in: 1973
used

material width:600 mmmaterial thickness: - 4,0 mmno. of straightening rolls:21 straightening roll diameter:30 mmmaterial cross-cut:1800 mm²speed:6 - 36 m/minPower capacity:4,5 kWWeight:2,0 tDimensions (WxDxH):1,5 x 2,0 x 1,9 m ... more information

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: FESTO BV 100-70 C Grip feed
item-No.: 164296711
used

material width:70 mmmaterial thickness:0 - 1,5 mmfeed length:100 mmmaterial cross-cut:60 mm²feeding force:400 Nclamping force of feeding pincer:1300 Nair pressure - required:3 - 6 barWeight:0,01 tDimensions (WxDxH):0,4 x 0,4 x 0,7 m ... more information

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: ERMAK CNC HVR 3100-6 Plate Shear - Hydraulic
item-No.: 164296456
new

sheet width:3100 mmplate thickness:6 mmdistance between columns:3100 mmno. of strokes:16 - 24 Hub/mincutting angle:0,5 - 1,5 °down holder:14 Stk.throat:350 mmtable height:900 mmoil volume:150 ltotal power requirement:11 kWweight of the machine ca.:7060 kgdimensions of the machine ca.:4100 x 2200 x 2190 mm1 brandnew hydraulic shear ERMAK CNC HVR 3100-134 with following equipment:- CNC controlled hydraulic blade gap adjustment system- CNC controlled cutting angle adjustment system- portable foot pedal- CNC controlled motorized backgauge system- front support arms with t-slot, ruler and flip stop- squaring arm- scales with metric and inches- cutting line illumination and shadow line- emergency stops- swing up backgauge- central lubrication system- front finger protection - rear sliding plates- front sliding plates with ball bearing on the table- 350 mm throat depth- pendant controller arm

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: ERMAK SPEED-BEND 4.320 Hydr. pressbrake
item-No.: 164296457
new

pressure:320 tchamfer lenght:4100 mmdistance between columns:3600 mmcolumn arm:410 mmram stroke speed:140 mm/secreturn speed:150 mm/secworking speed:10,5 mm/secwork stroke:375 mmdayligth:650 mmtable height:900 mmtable width:220 mmoil volume:400 lvoltage:400 Vtotal power requirement:30 kWweight of the machine ca.:22600 kgdimensions of the machine ca.:5350 x 2450 x 3150 mm1 brandnew ERMAK SPEED-BEND 4.320 hydr. press brake, directly from the factory, with DELEM DA 66 T CNC control and following equipment:- controlled back gauge with R-axis X = 800 mm R = 250 mm- finger adjustment Z1 + Z2 through ball screw- 2 front support arms - controlled axis Y1-Y2-X-R-Z1-Z2 + CNC-crowning system4- top tool - 4V universal die-block- BOSCH/HOERBIGER hydraulic system- SIEMENS electronic- SICK light barrier- FISSLER AKAS laser-light barrier- double foot switch- CE mark / conformity declaration- operation ...

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: MÃœLLER WEINGARTEN  Strip Straightening Machine
item-No.: 164295958
used

sheet width:2000 mmplate thickness:1.8 mmControls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mmRAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /minRAM (MECHAN. PRESS):. - ram adjustment:350 mmTOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width):2560 mm - Free passage between side columns (height):1500 mmDECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. di ...

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: SCHULER SMG  Band Straightening Machine
item-No.: 164295979
New in: 2004
used

band width:1050 mmplate thickness:8 mmnumber of rolls:8 DECOILER:. - design : single coil :. - sheet width max:1050 mm - sheet width (min):150 mm - max. weight of coil:22 to - max. diameter of coil:2000 mm - min. internal diameter of coil:570 mmFEEDERS:. - feeder: type : roll feeder :. - sheet width max:1050 mm - sheet thickness max:150 mmLEVELER UNIT:. - sheet width max:1050 mm - sheet width (min):150 mm - sheet thickness max:8 mm - sheet thickness (min):2.5 mm - number of leveler rolls:8 - diameter of leveler rolls:96 mm - distance between leveler rolls:104 mm - diameter of feed rolls:160 mm - feed velocity min.:2 m/min - feed velocity max.:43.5 m/minELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 HzTechnical description :Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of:- LAWECO COIL LO ...

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: COSTA MD4 Deburring Machine
item-No.: 164296491
new

Deburring and fine grinding machine for sheet metal / flat material, newThe compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.Working height: variable from 0,5mm ? 150mm adjustableWorking width: 1150 mmMaximum part weight: 300 kgWide belts with abrasive belt unwinding: 2200 mmAs standard with vacuum hold system, optional with magnetic hold systemDue to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.The machine structure can accommodate up to 3 internal machining units and an additional external machining unit.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: COSTA MD5 Deburring Machine
item-No.: 164296496
new

Deburring and fine grinding machine for sheet metal / flat material, newThe compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts.Working width: 1350 mmMaximum part weight: 400 kgWide belts with abrasive belt unwinding: 2620 mmAs standard with vacuum hold system, optional with magnetic hold systemBy using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life.Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.The machine structure can accommodate up to 3 internal machining units and an addition ...

sheet metal working
Entry date: 14.06.2024 add to watchlist
Machine: COSTA MD6 Deburring Machine
item-No.: 164296497
new

Deburring and fine grinding machine for sheet metal / flat material, newThe compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts.Working width: 1150 - 1350 mmMaximum part weight: 500 kgWide belts with abrasive belt unwinding: 2620 mmAs standard with vacuum hold system, optional with magnetic hold systemBy using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life.Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.The machine structure can accommodate up to 5 internal machining units and 2 ad ...