sheet metal working used for sale

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg  ... more information

plate thickness: 4 mmblade length: 250 mmangle adjustable from - to: fest 90 Gradtable surface area: 900 x 800 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions: 1,2 x 0,9 x 1,1 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 5 mmdistance between columns: 2600 mmtotal power requirement: 5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

pressure: 100 tpunching cross-cut in cmm: -- stroke: 100 mmthroat: 510 mmwork height max.: 1100 mmTwist power: 31 Durchm. in 25 mmchannels - flange: 100-400 mmNumber of ventilators: 80-400 mm: 100-400 mm: 100-550 mmpunch stroke: bei 20 mm Hub: 60 p.Minsheet thickness max.: bei Luftbiegung: 10 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,7 x 0,9 x 2,3 mElectric 380 Volt: Diverse punches and dies: Foot pedal: Machinefeets: Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz

working width: 2520 mm for sheets up to: 2.5 mm Opening width upper cheek: approx. 250 mm Adjustability bending cheek: 30 mm Upper cheek drive: 1.5 kW Lower cheek drive: 2.3 kW electr. Connection: 380 V kW Weight: 2300 kg Space requirement: 3300 x 1400 x 1430 mm  ... more information

Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. ... more information

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

Inv. Num. : 4970 Type: VS 310-6 Producer: Safan Created: 1981 Parameters: Maximum cutting length: 3100 mm Maximum sheet thickness when cutting: 6 mm Maximum cutting angle: 2 h Oil tank capacity: 150 l Total power requirement: 11 kW Back gauge: 1000 mm Machine weight: 6200 kg  ... more information

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg  ... more information

Working width: 2000mm, weight: 1.65t. ... more information

plate thickness:3 mmtotal power requirement:4 kWweight of the machine ca.:0,85 tdimensions of the machine ca.:1,2 x 1,0 x 1,1 mNotching machine hydraulic ... more information

- Cutting length: 220 mm - Capacity: 4 mm - Cutting angle: 90 ° - Required power : 2.2 kW - Operating voltage: 400 V - dimensions WxHxD: approx. 850 x 1100 x 1100 mm - Weight: approx. 600 kg  ... more information

CTO 400 Piesok press brake from 1981 for sale. (pressure 400t) The piston rod is damaged and has a micro-crack. We have dies and punches in various sizes for it - prices to be agreed. The total weight of the press is approximately 39t. ... more information

pressure: 80 tchamfer lenght: 2550 mmdistance between columns: 2050 mmControl: keine stroke: 250 mmlight barrier: SICK The machine was previously equipped with a CNC control,now converted to electrically manual operation.Digital display for backgauge.electrical stroke adjustmentMachine is functional and has been used sporadically for the past 15 years, as previous owner preferred to use a folding machine.tools included:1 set of upper tool1 lower tool (die block)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sell COLGAR 8100 mm / 450 Ton CNC press brake The construction of the machine was made of high quality materials, which ensure many years of safe operation of the machine. The device is 100% operational. In very good technical condition. The machine connected to the network, in constant use. Year of construction : 1981 After a comprehensive modernization of the control carried out in 2018 Control : CNC in 3 axes Y, X, R Press force: 450 tons Bending length: 8100 mm Distance between columns : 6100 mm Notch in columns 400 mm Bending height: 580 mm Stroke 250 mm Machine width: 2200 mm Height of the machine 4300 mm Machine weight: 58 tons Main motor power: 30 kW

MAX 20 X 1600  ... more information

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

Offer 23246 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Tubular circular saw - Inside and outside pipe end burr device - Mandrel bending device approx. 2000 mm - hydr. Spine Retraction - various bending tools as shown

sheet width - max.: 1255 mmplate thickness: 4,0 mm STplate thickness: 2,0 mm VAplate thickness: 6,0 mm ALUnumber of strokes - loaded: ~ 66 Hübe/min.cutting angle: 1,5 °total power requirement: 5,5 kWweight of the machine ca.: 2600 kg.range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition ()Furnishing:- electro-hydraulic guillotine shears- manual backgauge with analogue position display (scale + magnifying glass)- electrical cutting length limitation- manual cutting gap adjustment- 1x extra long side stop- 2x extra long support arms- 1x free moving footswitch- rear sheet metal slide- User manual (PDF) Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325278The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.