- (1)
- 3-Roller Round Bending Machines (21)
- Axis Laser Processing Equipment (3)
- Beading Machines (28)
- Bending And Straightening Machines (1)
- Bending Machines (40)
- Bending Tools (17)
- Blanking Presses For Profiled Materials (1)
- Blanking Presses For Sheet Metal (2)
- Blind Rivet Tongs (1)
- Circular Shears (7)
- CNC Bending Machines (10)
- CNC Hydraulic Plate Shear (31)
- CNC Laser Cutting Machines (124)
- CNC Plasma Cutting Machines (34)
- CNC Pressbrakes (145)
- CNC Punching Machines (27)
- CNC Punching Nibbling Machines (2)
- CO2 Laser Marker (3)
- Combination Machines (1)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (9)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (17)
- Coper-Notcher With Punch For Profiled Materials (1)
- Coper-Notcher With Punch For Sheet Metal (3)
- Cutting off machines (4)
- Cutting-To-Length Lines (22)
- Deburring Machines (6)
- Decoilers (58)
- Feed Straighteners (7)
- Film Cutting Machines (1)
- Flame Cutting Units (7)
- Flanging Machines (4)
- Flat, Bar And Section Shears (3)
- Folding Machines (138)
- Gear Fine Processing Machines (1)
- Guillotine Shears (109)
- Hand Lever Shears (6)
- Hand Plate Shear (3)
- Hole Punches (64)
- Honing Machines (4)
- Hydraulic Shear (134)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (89)
- Laser engraving machines (11)
- Laser Machines (14)
- Longitudinal Cutting Lines (22)
- Mandrel Bending Machines (4)
- Mandrel Pipe Bending Machines (9)
- Motorized Beading Machines (12)
- Motorized Plate Bending Machines (21)
- Motorized Shears (18)
- Nibbling Machines (5)
- Notching Machines (59)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (2)
- Other Sheet Metal Working Shears (2)
- Other Wire Working Machines (1)
- Pipe Bending Machines (3)
- Pipe Drawing Machines (5)
- Pipe Manufacturing Machines (15)
- Plasma Cutters (11)
- Plasma Cutting Machines (18)
- Plasma Cutting Presses (1)
- Plate And Section Shears (3)
- Plate Edge Pre-Bending Machines (4)
- Profile Bending Machines (32)
- Profile Steel Cutters (59)
- Profiling Machines (15)
- Profiling Systems (4)
- Punches (7)
- Punching Machines (60)
- Recoilers (6)
- Reel Straightening Units (2)
- Reels (12)
- Ring Bending Machines (41)
- Roll Bending Machines (20)
- Rotary Shears (1)
- Round Bending Machines (103)
- Section round bending machines (4)
- Shears For Profiled Materials (1)
- Shears For Sheet Metal Working (14)
- Sheet Metal Bending Machines (29)
- Sheet metal blowroom machines (21)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (5)
- Sheet Metal Deburring Machines (19)
- Sheet Metal Die (1)
- Sheet Metal Machining Centres (13)
- Sheet Metal Punching, Nibbling And Forming Machines (8)
- Sheet Metal Shears (44)
- Sheet Metal Straightening Machine (4)
- Sheet Notching Machines (1)
- Sheet Strip Feed Leveler (1)
- Smooth planer (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Straighteners (21)
- Tape Straightening Machines (11)
- Three-roll plate bending machines (12)
- Tube Bending Machines (58)
- Universal CNC Bending Machines (4)
- Universal Lockforming (4)
- Volume bending machines (2)
- Water Jet Cutting Machines (21)
- Wire And Strip Working Machines (2)
- Wire Coiling And Winding Machines (9)
- more
- A+B (1)
- A+B ERBEND (2)
- A+B FASTECH (1)
- AB BACKTEMANS (1)
- ABWICKELHASPEL (1)
- ACD (1)
- ACF (1)
- ACHENBACH, INNSE/MINO (1)
- ADGIE (1)
- ADIGE (7)
- ADIGE SYS (1)
- ADIRA (2)
- AEF (1)
- AGOTHA WMW (1)
- AIRLIQUIDE (1)
- AJAN (28)
- AJIAL (1)
- AK BEND (24)
- AK-BEND (29)
- Akbend (2)
- AKV 2238 (1)
- AKYAPAK (36)
- Alba (2)
- ALCOS (1)
- ALFA IN (1)
- ALFATEC (1)
- ALFHATECH (1)
- ALFRA (1)
- ALIKO (1)
- ALMI (8)
- ALMORE (1)
- ALP (1)
- Alpha (2)
- Alu (2)
- ALUMINIUMBLECHE (1)
- AMADA (136)
- AMADA PROMECAM (3)
- AMADA SCHIAVI (4)
- AMC (1)
- AMG (1)
- AMT (3)
- ANTIL (1)
- API (1)
- Apollo (4)
- aps (3)
- ARCO (1)
- ARKU (3)
- ARRIETA (1)
- ARTWELDING GMBH (1)
- ASC TRIM (1)
- ASH (1)
- Assistmach (34)
- ATHADER (1)
- ATLANTIC (14)
- ATLANTIC / HACO (1)
- ATS (4)
- AUERBACH (1)
- AUSKLINKWERKZEUG (1)
- AUTOMATIC LETTER BENDER (1)
- AUTOMATIC-SYSTEME DR (1)
- AUXMET HASPEL (1)
- AWM (1)
- AXIAL (2)
- AYEL-TECH (21)
- BACH (1)
- BACH APOLDA (1)
- BAD SALZUNGEN (4)
- BAIER (1)
- BAILEIGH (2)
- Balliu (2)
- BANNING (1)
- BARBERAN (1)
- BAUST (1)
- Baykal (47)
- BBM (2)
- BBT (1)
- Behrens (2)
- BEIJING YC DIGITTECH (1)
- BEIL (1)
- BEM BERLIN-ERFURTER MASCHINENFABRIK (1)
- BEMA (5)
- BENDER GMBH MASCHINE (1)
- BENDMAK (5)
- Bernardo (20)
- BETSCHKE WEGERHOFF (1)
- BEUTNER (1)
- BEYELER (30)
- BEYELER, (1)
- BIEGEMASTER (22)
- BIEGEROLLEN (1)
- BIHLER (1)
- BIKO (1)
- BIRIO (1)
- Birlik (2)
- BIRLIK MAKINA (1)
- BL (1)
- BLAAHOLM (1)
- BLEKEN (1)
- BLEMAS (1)
- BLISS (1)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 107)
used
Max. sheet thickness: 120mm, length: 2940mm, width: 3660mm, height: 2670mm. ... more information
New in: 1978
used
Pressing force: 40t, stroke adjustment: 13-57mm, ram adjustment: 60mm, stroke speed: 60-1200/min, connected load: 15kW, weight: 6t, with documentation, an inspection is possible. ... more information
used
New in: 1991
used
Including accessories and documentation. ... more information
New in: 1999
used
sheet width: 3200 mmplate thickness: 3,00 mmdistance between columns: mmmax. height of upper beam: 300 mmtotal power requirement: 4,5 kWweight of the machine ca.: 4,40 tdimensions of the machine ca.: 4,30 x 2,30 x 1,75 mFurnishing• System 5000 control• CNC - controlled back gauge 10-1500mm• Automatic upper and lower tool clamping• Automatic bending beam adjustment• Bombing• Technical documentsTools:• Bending rail 25mm (s = 3mm), segmented• Sharpening rail (8 pieces each 400mm, 7 of which are new and unused)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 2010
used
Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.
New in: 1990
used
sheet width: 3000 mmplate thickness: 6,00 mmdistance between columns: mmopening of the upper cheek: 450 mmopening of the down cheek: 125 mmOpening of the bending cheek: 125 mmtotal power requirement: kWweight of the machine ca.: 4,00 tdimensions of the machine ca.: mOperating voltage: 400 V / 50 HzControl voltage: 230 VDimensions: approx. L 4.00 x W 1.90 (plus HA 1000mm) x H 1.60 m- Renewed control cabinet with Siemens control- controlled back gauge 1000 mm- Crowning adjustment- Support table with wheels- various bending rails including sharp rail- segmented goats foot- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Stroke speed: 42/min, connected load: 2.5kW. ... more information
New in: 1998
used
I - beam section - flat steel: - mmI-beam section - upend: - mmL-beam: - mmtube diameter: 60 x 1,5 mmspeed: 10 m/mintotal power requirement: 0,75 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: mm- hydraulic roller drive- Planetary gear delivery of the 2 lower rollers- for extra small bending radii- hardened tool holder (42CrMo4)- Standard roller set, hardened- lateral straightening rollers- mobile control panel- 3 powered rollers- Digital display- Machine can be used horizontally and vertically- CE mark / declaration of conformity- User manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 2006
used
There are two identical machines available, band thickness: 0.1-4mm, band width: 10-150mm, weight: 100kg, year of construction machine 1/ 2: 2000/ 2006. ... more information
New in: 2024
new
: 2100 mm: 8,0 mm: 6,0 mmdiameter of upper rolls: 190 mmside roll diameter: 150 mmdiameter of lower rolls: 170 mm: 3,0 kW: 3290 kg: 4042 x 1380 x 1254 mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Working width: 2040mm, max. sheet thickness: 5mm, weight: 3.3t. ... more information
New in: 2005
used
sheet width: 3100 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 1°15 °down holder: 14 Stkno. of strokes: 15 Hub/minoil volume: 170 ltotal power requirement: 15 kWdimensions of the machine ca.: 3850 x 3100 x 1950 mmweight: 6900 kgFurnishing:- electric back gauge 750 mm- front support plates with ball rollers- Light barrier behind the machine- Hydraulic cutting adjustment- Cutting gap regulation via handwheel- LED cutting edge lighting- 1x side stop with scale 1500 mm- 1x freely movable foot switch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1975
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... more information
New in: 2000
used
sheet width: 3050 mmplate thickness: 6 mmrear stop: 750 mmcutting angle: 0,5 - 3,0 °down holder: 18 Stkno. of strokes: 9 - 17 Hub/minoil volume: 200 ltotal power requirement: 7,5 kWdimensions of the machine ca.: 3750 x 1650 x 1700 mmweight: 4500 kgFurnishing:- electric back gauge 750 mm- front support plates with ball rollers- Light barrier behind the machine- Hydraulic cutting adjustment- Cutting gap regulation via handwheel- LED cutting edge lighting- 1x side stop with scale 1500 mm- 1x freely movable foot switch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1973
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... more information
used
working area: 860 x 610 mmProduct thickness max. (with honeycomb table): 40 mmLaser Source (sealed CO2 Laser, air-cooled: 30 Wattdimensions: 1.365 x 880 x 1010 mmPrinter Interface: 2.0 USBFor cutting, grooving, perforating and engraving a wide range of materials.The operator selects the corresponding job on the Digicut eco via a four-line display. The adjustments necessary for processing, such as intensity and speed of the laser, are determined in advance by color-specific settings in the printer driver.The user needs a vector-oriented graphics program such as CorelDraw, Adobe Illustrator, etc.Including accessories such as honeycomb table, waste tray, compressor, barcode scanner, operating instructions, softwareThe machine is offered without suction, this is optionally available for an additional charge.There are currently several demonstration machines (Years of construction around 2016 ...
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... more information
used
2.100 € 
New in: 1976
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... more information