sheet metal working used for sale

plate width: 3100 mmplate thickness: 6 mmdistance between columns: 3150 mmno. of strokes: 20 - 75 Hub/mincutting angle: 0,5 - 1,25 °down holder: 16 Stückvoltage: 380 Vfrequency: 50 Hzpower capacity: 10 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 4,0 x 2,1 x 1,7 mwith electr. back stop,spare cutter,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mmcoil weight: 250 kgcoil internal dia.: Ø 290-550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

round bar steel: 45 mmsquare edge steel: 40 mmL-beam: 120 x 13 mmflat steel: 500 x 12 mmpunching pressure: 60 tthroat: 510 mm: 500 x 12 oder 400 x 16 mmpunch diameter: 27 in 17 mmpunch diameter: 39 in 12 mmoil volume: 80 ltotal power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,8 x 0,9 x 1,8 mHydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm².Electric 380 voltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mmplate thickness: 10,00 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTop roller diameter: 195 mmIncludes rollers for rolling flat steelClockwise and anti-clockwise rotation via handheld control unitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 250 mmmaterial thickness: 2 mmno. of straightening rolls: 19 weight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1500x1500x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

material width: 2500 mmmaterial thickness: 25,00 mmno. of straightening rolls: 7 sheet thickness - min.: 8,00 mmtotal power requirement: kWweight of the machine ca.: 61 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven ...

Used machine in good condition. Available for immediate delivery. - Pressure force: 50 t - Bending length: 2.050 mm - Axes: Y; X; R1; R2; Z - Control: Delem EMA DA 42  ... more information

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls. ... more information

Used fully automatic copper / nickel cathodes (max. 1200x1200x25 mm) longitudinal and transverse cutting line, incl. vacuum feeding unit, plate feeding device, scissors 1 for shearing strips, pulling device, transport and lifting device, shear 2 for shearing on squares, apron conveyor for part ejection. Scissors each with hold-down device

material width:300 mmcoil weight:0,5 tmaterial thickness:0,4 - 3,0 mmcoil internal diameter:420 - 520 mmcoil external diameter:1200 mmno. of straightening rolls:9 straightening roll diameter:50 mmnumber of draw-in rolls:2 diameter of draw-in rolls:50 mmpower requirement:1,5 kWweight:1,55 tdimensions (WxDxH):2,5 x 1,2 x 1,8 m

Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg  ... more information

Specifications: - Pressure capacity 1000 KN - Stroke infinitely adjustable 10 - 100 mm - Stroke rate 34 - 80 1/min - Projection approx. 510 mm - Installation height approx. 450 mm - Drive 400 V / 15 kW - punches e.B. up to 31 mm Ø in steel 25 mm - with special punch saddle z.B. up to 58 mm Ø in steel 13 mm - e.B. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2400 x D 2300 mm - Weight approx. 3600 kg - with: - Hydr. Low Pressure Grain Detection Device - various punches + matrices - Emergency stop button

Type: XZMP 3150/16 Parameters: 3150 mm, 16 mm Manufacturer: Strojárne Piesok Year of production: 1984 Location: Czech Republic Description: Max. bending length 3150 mm Max. plate thickness 16 mm Min. inner diameter of rounded tube 550 mm Rolling speed 7 mm / min Roller adjustment speed 2x22 mm / min Machine dimensions LxWxH 7900x1930x2500 mm Machine weight 46800 kg

Max. length of plate 2050 mm Max. plate thickness 4 mm Number of rolls 3 pcs Upper roll diameter 136 mm Lower roll diameter 136 mm Max. pre bending capacity 4 mm ... more information

Cutting length: 1250mm, table height: 830mm, connected load: 22kW, length: 1900mm, width: 2200mm, height: 1900mm, weight: 9.6t, with documentation, without spare parts. ... more information

Offer 24126 Specifications: - Bending process mot. with automatic or manual operation - Bending capacity square bar ST 37 up to approx. 30 mm - Bending capacity flat bar ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twist length 10 x material thickness ( long side ) - Bending time preselection / bending length twist preselection - Right – counterclockwise -Tailstock - Elbow + ring bending device GRB 66 with various roller sets - Bending performance - flat steel 60x10 mm high, R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 1/2" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roll sets steel 1 1/4" , plastic 1 1/2" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 ...

material width:250 mmmaterial thickness:0,25 - 3,0 mmno. of straightening rolls:11 straightening roll diameter:30 mmspeed:6 - 60 m/minpower requirement:15,0 kWweight:1,1 tdimensions (WxDxH):1,1 x 1,7 x 1,5 mstriaghtening pressure automatic:hydraulic coil loof control:ultrasonic  ... more information

Max. bending length: 1500 mm Max. sheet thickness: 10 mm steel Upper roll diameter: 195 mm Includes rollers for rolling flat steel Clockwise and anticlockwise rotation via hand-held control unit  ... more information

Type: UBR 25 x 2000-7 / 16 Manufacturer / make: WMW Wildau Baujahr / year: 1984 max. sheet width: 2000 mm max. sheet thickness ( St 50): 25 mm min. sheet thickness / min. sheethickness: 8 mm Number of straightening rollers: 7 rollers Weight of the machine / weight: 51 t ... more information