- (3)
- 3-Roller Round Bending Machines (21)
- Axis Laser Processing Equipment (3)
- Beading Machines (28)
- Bending And Straightening Machines (1)
- Bending Machines (41)
- Bending Tools (17)
- Blanking Presses For Profiled Materials (1)
- Blanking Presses For Sheet Metal (2)
- Blind Rivet Tongs (1)
- Circular Shears (7)
- CNC Bending Machines (10)
- CNC Hydraulic Plate Shear (31)
- CNC Laser Cutting Machines (124)
- CNC Plasma Cutting Machines (36)
- CNC Pressbrakes (146)
- CNC Punching Machines (27)
- CNC Punching Nibbling Machines (2)
- CO2 Laser Marker (3)
- Combination Machines (1)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (8)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (17)
- Coper-Notcher With Punch For Profiled Materials (1)
- Coper-Notcher With Punch For Sheet Metal (3)
- Cutting off machines (4)
- Cutting-To-Length Lines (22)
- Deburring Machines (6)
- Decoilers (54)
- Feed Straighteners (7)
- Film Cutting Machines (1)
- Flame Cutting Units (9)
- Flanging Machines (4)
- Flat, Bar And Section Shears (3)
- Folding Machines (143)
- Gear Fine Processing Machines (1)
- Guillotine Shears (110)
- Hand Lever Shears (6)
- Hand Plate Shear (3)
- Hole Punches (64)
- Honing Machines (4)
- Hydraulic Shear (135)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (88)
- Laser engraving machines (11)
- Laser Machines (14)
- Longitudinal Cutting Lines (22)
- Mandrel Bending Machines (6)
- Mandrel Pipe Bending Machines (9)
- Motorized Beading Machines (12)
- Motorized Plate Bending Machines (23)
- Motorized Shears (18)
- Nibbling Machines (5)
- Notching Machines (58)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (2)
- Other Sheet Metal Working Shears (2)
- Other Wire Working Machines (1)
- Pipe Bending Machines (3)
- Pipe Drawing Machines (5)
- Pipe Manufacturing Machines (15)
- Plasma Cutters (11)
- Plasma Cutting Machines (19)
- Plasma Cutting Presses (1)
- Plate And Section Shears (3)
- Plate Edge Pre-Bending Machines (4)
- Profile Bending Machines (35)
- Profile Steel Cutters (61)
- Profiling Machines (15)
- Profiling Systems (4)
- Punches (7)
- Punching Machines (57)
- Recoilers (6)
- Reel Straightening Units (2)
- Reels (12)
- Ring Bending Machines (42)
- Roll Bending Machines (20)
- Rotary Shears (1)
- Round Bending Machines (103)
- Section round bending machines (4)
- Shears For Profiled Materials (1)
- Shears For Sheet Metal Working (14)
- Sheet Metal Bending Machines (30)
- Sheet metal blowroom machines (21)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (5)
- Sheet Metal Deburring Machines (20)
- Sheet Metal Die (1)
- Sheet Metal Machining Centres (12)
- Sheet Metal Punching, Nibbling And Forming Machines (8)
- Sheet Metal Shears (44)
- Sheet Metal Straightening Machine (4)
- Sheet Notching Machines (1)
- Sheet Strip Feed Leveler (1)
- Smooth planer (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Straighteners (21)
- Tape Straightening Machines (10)
- Three-roll plate bending machines (12)
- Tube Bending Machines (83)
- Universal CNC Bending Machines (4)
- Universal Lockforming (4)
- Volume bending machines (2)
- Water Jet Cutting Machines (21)
- Wire And Strip Working Machines (2)
- Wire Coiling And Winding Machines (9)
- more
- A+B (1)
- A+B ERBEND (2)
- A+B FASTECH (1)
- AB BACKTEMANS (1)
- ABWICKELHASPEL (1)
- ACD (1)
- ACF (1)
- ACHENBACH, INNSE/MINO (1)
- ADGIE (1)
- ADIGE (7)
- ADIGE SYS (1)
- ADIRA (2)
- AEF (1)
- AGOTHA WMW (1)
- AIR LIQUIDE (1)
- AIRLIQUIDE (1)
- AJAN (28)
- AJIAL (1)
- AK BEND (24)
- AK-BEND (29)
- Akbend (2)
- AKV 2238 (1)
- AKYAPAK (36)
- Alba (2)
- ALCOS (1)
- ALFA IN (1)
- ALFATEC (1)
- ALFHATECH (1)
- ALFRA (1)
- ALIKO (1)
- ALMI (8)
- ALMORE (1)
- ALP (1)
- Alpha (2)
- Alu (2)
- ALUMINIUMBLECHE (1)
- AMADA (138)
- AMADA PROMECAM (3)
- AMADA SCHIAVI (4)
- AMC (1)
- AMG (1)
- AMT (2)
- ANTIL (1)
- API (1)
- Apollo (4)
- aps (3)
- ARCO (1)
- ARKU (3)
- ARRIETA (1)
- ARTWELDING GMBH (1)
- ASC TRIM (1)
- ASH (1)
- Assistmach (34)
- ATHADER (1)
- ATLANTIC (14)
- ATLANTIC / HACO (1)
- ATS (4)
- AUERBACH (1)
- AUSKLINKWERKZEUG (1)
- AUTOMATIC LETTER BENDER (1)
- AUTOMATIC-SYSTEME DR (1)
- AUXMET HASPEL (1)
- AWEA (1)
- AWM (1)
- AXIAL (2)
- AYEL-TECH (21)
- BACH (1)
- BACH APOLDA (1)
- BAD SALZUNGEN (4)
- BAIER (1)
- BAILEIGH (2)
- Balliu (2)
- BANNING (1)
- BARBERAN (1)
- BAUST (1)
- Baykal (47)
- BBM (1)
- Behrens (2)
- BEIJING YC DIGITTECH (1)
- BEIL (1)
- BEM BERLIN-ERFURTER MASCHINENFABRIK (1)
- BEMA (5)
- BENDER GMBH MASCHINE (1)
- BENDMAK (5)
- Bernardo (20)
- BETSCHKE WEGERHOFF (1)
- BEUTNER (1)
- BEYELER (31)
- BEYELER, (1)
- BEYLER (1)
- BIEGEMASTER (22)
- BIEGEROLLEN (1)
- BIHLER (1)
- BIKO (1)
- BIRIO (1)
- Birlik (2)
- BIRLIK MAKINA (1)
- BL (1)
- BLAAHOLM (1)
- BLEKEN (1)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 107)
New in: 1999
used
Max. pressing force: 850kN, max. stroke: 365mm, compressed air supply: 6bar, connected load: 14kVA, weight: 9.95t, with documentation, without tools, was maintained regularly, an inspection is possible. ... more information
used
Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible. ... more information
New in: 1986
used
Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. ... more information
New in: 1994
used
Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible.
used
Working width: 2040mm, max. sheet thickness: 4mm, weight: 1.8t, an inspection is possible. ... more information
New in: 2007
used
TECHNICAL SPECIFICATION Max. diameter of tube: 65 mm Max. wall thickness: 2 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 5400 mm space requirements -front/back-: 1550 mm total height: 1500 mm total weight approx.: 6500 kg+ 8-axis CNC pipe and wire bender+ CNC controlled feeder with pneumatic grippers+ separate servo drives for A-axis: rotation unit 35 mm B-axis: bending heand C-axis: feeder D-axis: &nb sp;mandrel device L-axis: slide rail P-axis: chucking device V-axis: counter holder Y-axis: bending Z-axis: & nbsp;bending head up/downFeedi ...
used
used
STRIP-FEEDER sheet width max.: 210 mm sheet thickness max.: 6 mmStrip feed unit (without servo) for GKP or MFA 160TStrip thickness: 6 mmStrip width: 210mm.It is recommended to use:DYNABOX 45 MEDIUM gearboxServo motor BECKHOFF AM8543-0E20Resolution 0.1mm ... more information
New in: 2018
used
Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm ... more information
used
STRIP-FEEDER sheet width max.: 250 mm sheet thickness max.: 10 mmStrip feed unit (without servo) for GKP or MFA 250TStrip thickness: 10 mmStrip width: 250mm.It is recommended to use:DYNABOX 90 MEDIUM gearboxServo motor BECKHOFF AM8062-0L20Resolution 0.1mm ... more information
New in: 2007
used
There are 2 notching machines available. Rotox SAF 165, year of manufacture: 2007, saw blade diameter: 250mm, speed: 2800rpm, pressure: 6-7bar, weight: 273kg. Hanning BVH8K2, speed: 2700rpm. ... more information
New in: 1990
used
CONTROLS PLC SIEMENS S5 100 U DECOILER sheet width max.: 120 mmLEVELLER UNIT number of leveller rolls: 19 2 x machines ... more information
New in: 2014
used
Pressing force: 71kN, projection: 610mm, max. stroke length: 220mm, output: 1400E/h, weight: approx. 1300kg. ... more information
New in: 2005
used
CONTROLS PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 4 mm coil weight max.: 10.5 to feedstock transport direction: right to left COIL CHAIR coil weight max.: 10.5 to stroke: 750 mmDECOILER design: single reel sheet width max.: 500 mm sheet width (min): 150 mm coil weight max.: 10.5 to max. diameter of coil: 2020 mm mandrel expansion range from: 470 mm mandrel expansion range up to: 530 mm feed velocity max.: 20 m/minLEVELLER UNIT sheet width max.: 500 mm sheet width (min): 150 mm sheet thickness max.: 4 mm sheet thickness min.: 2 mm number of leveller rolls: 9 diameter of leveller rolls: 56 mm &n ...
New in: 1998
used
There are 3x punch rivet feeders and 2x C-pliers Böllhoff available. Self-pierce rivet feeder: 2x ABF, 1x LG, years of construction: 1998-2003, rivets: 3x4mm and 3x5mm. C-tongs: Year of manufacture: 1998, max. rivet setting pressure: 250bar, max. rivet setting force: 50kN. Documentation available. On-site inspection is possible.
New in: 1984
used
FEEDSTOCK TUBE external diameter min.: 25 mm external diameter max.: 55 mm length min.: 3500 mm lenght max.: 10000 mmPRODUCT (PROFILE, TUBE) length min.: 5000 mm lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE force: 320 kN drawing length max.: 13500 mm number of parallel trains / strands max.: 3 speed max.: 100 m/minFunction: Automatic (manual threading, pull chain runs forwards and backwards, front bench can be swiveled vertically)Products: Round tubes (mostly shock absorbers), semi-finished or finished productsModernized: 1999 new pulling belt and brake2022 pulling chain partially renewedmax. drawing rod / pointed end diameter: 40 mmmin. drawing rod / pointed end diameter: 14 mmmax. drawing rod / pointed end length: 170 mmmin. drawing rod / pointed end length: 150 mmnumb ...
New in: 1981
used
Working width: 2000mm, weight: 1.65t. ... more information
New in: 1988
used
CONTROLS PLC SIEMENS FEEDSTOCK STEEL STRIP sheet width max.: 450 mm sheet width min.: 90 mm sheet thickness max.: 13 mm sheet thickness min.: 2 mm exterior coil diameter max.: 1900 mm exterior coil diameter min.: 1100 mm internal coil diameter max.: 760 mm internal coil diameter min.: 610 mmPRODUCT (PROFILE, TUBE) external diameter min.: 30 mm external diameter max.: 140 mm wall thickness min.: 2 mm wall thickness max.: 12 mm length min.: 4000 mm lenght max.: 10000 mmLINE CHARACTERISTICS Forming Process: rollforming welding process: HF inductive sawing process: travelling speed max.: 65 m/min feedstock transport direction: left to right Line consists of:- Strip prepara ...
New in: 2004
used
Working width: 3200mm, max. sheet thickness at 400N/mm² with bending tool width 30mm: 4mm, min. bending radius: 1.25xsheet thickness, min. inner flange height: approx. 6xsheet thickness. Inner flange height: approx. 6xsheet thickness. Max. Opening height of upper beam: 400mm, max. adjustment range of bending and lower beam: 80mm, bending angle: 0°-180°, max. bending speed: 74°/s. Clamping speed upper beam DOWN/UP: 40mm/92mm, weight: approx. 5500kg, control: RAS System 6000, documentation available.
New in: 2001
used
CONTROLS PLC SIEMENS FEEDSTOCK STEEL STRIP sheet width max.: 221 mm sheet width min.: 58 mm sheet thickness max.: 8 mm sheet thickness min.: 1 mm exterior coil diameter max.: 2100 mm exterior coil diameter min.: 1600 mm internal coil diameter max.: 610 mm internal coil diameter min.: 508 mm coil weight max.: 6000 kgPRODUCT (PROFILE, TUBE) external diameter min.: 22 mm external diameter max.: 65 mm length min.: 4500 mm lenght max.: 10000 mmLINE CHARACTERISTICS Forming Process: rollforming welding process: HF inductive sawing process: travelling speed max.: 100 m/min feedstock transport direction: left to right Line consists of:- Band Preparation VAI-SEUTHE BV 200-8 (YoM 2001, Siem ...